Abstract:C ONFIGURATIONS with a highly flexible delta wing are considered for the next generation of unmanned air vehicles (UAV). Delta wing flowfield is dominated by vortical structures at high angle of attack, the most prominent is called leading-edge vortex. Ye and Zhao [1] used a nonlinear lifting line method to compute the aerodynamic loads of the delta wing at high angle of attack. With the development of computer technology, computational fluid dynamics (CFD) technique has been used in the simulation of delta wing-induced vortical flow. The study [2] shows that the Reynolds number affects primary vortex slightly, and so Euler codes can be employed to simulate the vortex and aerodynamic loads; the shortness is that it cannot simulate the secondary vortex caused by the effect of viscosity. The CFD and computational structural dynamics (CSD) direct coupling method has been used in aeroelastic analysis of deltawing.Gordnier et al. [3,4] coupled Euler/ Navier–Stokes codes and nonlinear plant element to study the buffet problem of the flexible delta wing at high angle of attack. The CFD and CSD direct coupling method [5–7] has also been used in the nonlinear flutter simulation of delta wing at small angle of attack (<5 deg). The limitation of the direct aeroelastic simulation method is the high cost of the computational time. To solve the contradiction between computational efficiency and computational quality, many researchers turn to CFD-based unsteady aerodynamic reduced-order modeling (ROM) to improve the aeroelastic computational efficiency in the last decade. Dowell and Hall [8], Lucia et al. [9], and Zhang and Ye [10] present some overviews of ROM and its applications on nonlinear aeroelastic research. There are two kinds of methods for ROMof unsteady aerodynamic loads at the present time. The one is the proper orthogonal decomposition (POD) based reduced-order modeling method, the other is aerodynamic modeling based on structural modes by using identification technology. The second method is used in this work. Zhang [11] compared the efficiency between the ROM-based method and the CFD direct simulation method. Efficiency can be improved by 1 2 orders with accuracy still retained by ROM-based method. Zhang used CFDbased ROM to perform aeroservoelastic analysis [12] and transonic flutter suppression by active control [13].

A Reduced Order Model Based on Block Arnoldi Method for Aeroelastic System

Efficient Nonlinear Reduced-Order Model for Computational Fluid Dynamics-Based Aeroelastic Analysis

Reduced-Order-Model-Based Flutter Analysis at High Angle of Attack

Proper Orthogonal Decomposition Reduced-Order Model for Nonlinear Aeroelastic Oscillations

A Fast Aeroelastic Response Prediction Method Based on Proper Orthogonal Decomposition Reduced Order Model

High Efficient Numerical Method for Limit Cycle Flutter Analysis Based on Nonlinear Aerodynamic Reduced Order Model Reduced Order Model

A New and Effective Method for Reducing Order of Aerodynamics of a Wing with Control Surface for Ground Flutter Test

Efficient Method For Limit Cycle Flutter Analysis By Nonlinear Aerodynamic Reduced-Order Models

Transonic aeroelastic analysis basing on reduced order aerodynamic models

Reduced order aerodynamics for delta wing pitching oscillations

Aero-Elastic Active Control Modeling Via Improved POD Method

A novel unsteady aerodynamic Reduced-Order Modeling method for transonic aeroelastic optimization

Nonlinear Aerodynamics Reduced-Order Model Based on Multi-Input Volterra Series

Nonlinear Aeroelastic Panel Flutter Based on Proper Orthogonal Decomposition

Nonlinear aeroelastic stability analysis based on CFD reduced order models

Aerodynamic System Modeling Based on Proper Orthogonal Decomposition

Aeroelasticity Numerical Analysis Via Volterra Series Approach

A Novel Model Reduction Method Based on Balanced Truncation

INVESTIGATION OF MODEL REDUCTION FOR AEROSERVOELASTICITY BASED ON UNSTEADY AERODYNAMICS ESTIMATING

Active Flutter Suppression Control Law Design Method Based on Balanced Proper Orthogonal Decomposition Reduced Order Model

Spectral Proper Orthogonal Decomposition Reduced-Order Model for Analysis of Aerothermoelasticity