Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Reduced-Order Model Approaches for Predicting Airfoil Performance

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Data-driven reduced-order modeling for nonlinear aerodynamics using an autoencoder neural network

A reduced-order model for compressible flows with buffeting condition using higher order dynamic mode decomposition with a mode selection criterion

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

Reduced Order Models for the Aerodynamic Calculation of the Wind Turbine Airfoil

A Fast Aeroelastic Response Prediction Method Based on Proper Orthogonal Decomposition Reduced Order Model

Evaluation of reduced-order models for the rapid aerodynamic analysis of supersonic and hypersonic bodies

A novel unsteady aerodynamic Reduced-Order Modeling method for transonic aeroelastic optimization

Accuracy and Computational Cost Comparison of Numerical Flight Dynamics Reduced-Order Models

Data-driven Construction of a Reduced-Order Model for Supersonic Boundary Layer Transition

A Reduced Order Model Based on Block Arnoldi Method for Aeroelastic System

ADVANCES AND PROSPECTS OF THE REDUCED ORDER MODEL FOR UNSTEADY FLOW AND ITS APPLICATION

Stabilized POD Reduced Order Models for convection-dominated incompressible flows

Geometrically Parametrised Reduced Order Models for the Study of Hysteresis of the Coanda Effect in Finite Element-based Incompressible Fluid Dynamics

A Nonlinear POD Reduced Order Model for Limit Cycle Oscillation Prediction

A hybrid reduced-order model for segregated fluid-structure interaction solvers in an ALE approach at high Reynolds number

Investigation on the Reduced-Order Model for the Hydrofoil of the Blended-Wing-Body Underwater Glider Flow Control with Steady-Stream Suction and Jets Based on the POD Method

Adjacency-based, Non-intrusive Reduced-order Modeling for Fluid-Structure Interactions

Efficient Transonic Aeroelastic Model Reduction Using Optimized Sparse Multi-Input Polynomial Functionals

Reduced Order Data-Driven Analysis of Cavitating Flow over Hydrofoil with Machine Learning