Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Automated optimal experimental design strategy for reduced order modeling of aerodynamic flow fields

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Transonic Flow Reconstruction by an Adaptive Proper Orthogonal Decomposition Hybrid Model

Reduced-Order Model Approaches for Predicting Airfoil Performance

A novel unsteady aerodynamic Reduced-Order Modeling method for transonic aeroelastic optimization

Data-Driven Nonintrusive Model-Order Reduction for Aerodynamic Design Optimization

Fast flow field prediction of three-dimensional hypersonic vehicles using an improved Gaussian process regression algorithm

Investigation on the Reduced-Order Model for the Hydrofoil of the Blended-Wing-Body Underwater Glider Flow Control with Steady-Stream Suction and Jets Based on the POD Method

Optimal Sparsity in Nonlinear Non-Parametric Reduced Order Models for Transonic Aeroelastic Systems

Data-Driven Reduced-Order Model for Bubbling Fluidized Beds

Data-driven reduced-order modeling for nonlinear aerodynamics using an autoencoder neural network

Standardized Non-Intrusive Reduced Order Modeling Using Different Regression Models With Application to Complex Flow Problems

Design Optimization of the Last Stage of a 4.5-Stage Compressor Using a POD-based Hybrid Model

Data-driven Construction of a Reduced-Order Model for Supersonic Boundary Layer Transition

Towards Reduced Order Models via Robust Proper Orthogonal Decomposition to capture personalised aortic haemodynamics

An adaptive sampling algorithm for reduced‐order models using Isomap

A reduced-order model for compressible flows with buffeting condition using higher order dynamic mode decomposition with a mode selection criterion

Efficient Transonic Aeroelastic Model Reduction Using Optimized Sparse Multi-Input Polynomial Functionals