Abstract:Introduction. Polybrominated diphenyl ethers (PBDEs) are undoubtedly the most important group of organohalogenated compounds that captures the attention of environmental scientists in recent years. PBDEs are widely used flame retardant additives in polymers and textiles and are present in nearly all of our daily appliances. There are growing evidences that these brominated flame retardants are entering the global ecosystem at a significant rate (de Boer et al., 2000; Ikonomou et al., 2002; Norstrom et al., 2002; Kierkegaard et al., 2004). In order to assess their risk to the environment and public health, their levels in the various environmental compartments have to be closely monitored. This relies on the development of reliable, rapid and sensitive analytical techniques for polybrominated organic compounds. Solid-phase microextraction (SPME) is one of the advanced sampling and sample preparation techniques that are useful in the determination of trace organics in environmental samples (Polo et al., 2004; Salgado-Petinal et al. 2006). There are already numerous reports on the use of SPME for PBDE determination in water and solid samples. However, there are still problems to be solved before the technique can be applied to more demanding sample matrices, such as blood plasma. We have examined the applicability of most commercially available SPME coatings in the direct sampling of PBDEs in aqueous media and found them to show rather poor analyte affinity and repeatability, especially towards heavier PBDE congeners. There is a call for the development of new and more robust SPME coatings that possess selective affinity for PBDE congeners. In this context, we explored the feasibility of using molecularly imprinted sol-gel silica films as SPME coatings. A series of ORMOSIL films of various compositions were fabricated and examined for stability under the SPME sampling and GC desorption conditions. The sol-gel silica coating from phenyltrimethoxysilane and tetraethoxysilane (TEOS) is found to be the most suitable candidate. Molecular imprinting of BDE209, the heaviest PBDE congener, into the sol-gel SPME coating can be easily accomplished by dissolving the congener into the sol prior to gelation. The resulting sol-gel SPME coating is found to possess much higher stability and affinity towards PBDE congeners. In this work, we present the detail fabrication procedures for the molecularly imprinted SPME coating and the evaluation of its performance in the determination of BDE209 and other lighter PBDE congeners in various environmental sample matrices.

Solid-phase Microextraction of Phosphate and Methylphosphonate Using Novel Fibers Coated with a Sol-Gel-Derived Silicone-Divinylbenzene Co-Polymer

Preparation and Characteristics of New Coating for Solid-Phase Microextraction.

In situ hydrothermal grown silicalite-1 coating for solid-phase microextraction.

Development of Molecularly Imprinted Sol-Gel SPME Devices for the Determination of Polybrominated Diphenyl Ethers

Sulfuric Acid Modified Poly (GMA-EGDMA) Coating for Solid Phase Microextraction Coupled with High Performance Liquid Chromatography and Its Application to Determination of Four Pharmaceuticals and Personal Care Products in Water

Continuity and change in personality.

Benefits of Innovative and Fully Water-Compatible Stationary Phases of Thin-Film Microextraction (TFME) Blades

Polythiophene As a Novel Fiber Coating for Solid-Phase Microextraction

Reactivity of blood samples spotted onto filter papers in the WST-8 method for screening of G6PD deficiency.

High pressure liquid chromatographic determination of aflatoxins in peanut butter using a silica gel-packed flowcell for fluorescence detection.

Ethane-bridge periodic mesoporous organosilica materials as a novel fiber coating in headspace solid-phase microextraction of phthalate esters from saliva and PET container samples

A solid-phase microextraction fiber with carbon nanoparticles as sorbent material prepared by a simple flame-based preparation process

Development of A Solid-Phase Microextraction Fiber Coated with Poly(Methacrylic Acid-Ethylene Glycol Dimethacrylate) and Its Application for the Determination of Chlorophenols in Water Coupled with Gc

Oxygen-doped graphite carbon nitride as a fiber coating material for headspace solid-phase microextraction of organic phosphate esters

Development of a High-Efficient and Environmentally Friendly Melamine-Formaldehyde Resin-Based Solid Phase Microextraction Fiber for Enhanced Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Water

Solid-phase microextraction of phthalate esters from aqueous media by electrophoretically deposited TiO₂ nanoparticles on a stainless steel fiber

Preparation of graphene-coated solid-phase microextraction fiber and its application on organochlorine pesticides determination

Synthesis of SiO2@MOF-199 as a Fiber Coating for Headspace Solid-Phase Microextraction of Phthalates in Plastic Bottled Milk

Preparation and evaluation of mesoporous cellular foams coating of solid-phase microextraction fibers by determination of tetrabromobisphenol A, tetrabromobisphenol S and related compounds

Molecularly Imprinted Polymer As Micro-Solid Phase Extraction Combined with High Performance Liquid Chromatography to Determine Phenolic Compounds in Environmental Water Samples

Trifluoroacetic acid modified MOF-808 composite coating for solid-phase microextraction of six phenols followed by gas chromatography analysis