Abstract:In-situ conversion of oil shale process has been appealing from economic and energy security perspectives. Conventional in-situ upgrading techniques use electric heaters to heat oil shale, not shale oil. However, the efficiency of electrical heating method is very slow which requires preheating more than a year. Most conventional heating technologies focused on using different heat injection methods converting the shale oil reservoirs. As shale is a poor heat conductor, many of attempts are still in the laboratory stage. The shale oil matrix is very tight and the pore scale ranges from micro to nano-meter. In this paper, we propose to inject air into hydraulically fractured horizontal wells to create in-situ combustion of shale oil in ultra-low permeability formations. Heat is introduced into the formation through multistage fractured horizontal wells, which enhances the contact area of exposed kerogen. This process uses combustion reactants as fuel feed stock to generate perpetual heating. Firstly, we used the laboratory tube combustion of shale oil results to validate the simulation model. Then, we upscale the simulation model to investigate the well productivity performance by in-situ upgrading of shale oil by air injection. The main objective of this work is to determine the technical feasibility of recovering shale oil resources by air injection. It involves the application of hydraulic fracturing technology to enhance the kerogen exposure to oxygen. Heat flows from the fracture into shale oil formation, gradually converting the solid kerogen into mobile oil and gas which can be produced via fractures to the production wells. Our simulation results in this paper have shown the potential of in-situ combustion process to improved oil recovery in shale oil reservoirs. Simulation result indicates that the key parameters controlling the well productivity include air injection rate, injected gas composition and fracture spacing. The available literature provides limited studies on the applicability of in-situ combustion of shale oil in very low permeability formations. The paper provides a comprehensive model that allows kerogen to undergo thermal cracking and oxidation process. The results of this study indicate that the developed kinetic model is feasible to model the kerogen in-situ conversion process induced by air injection.

Development of an Integrated Oil Shale Refinery Process with Coal Gasification for Hydrogen Production

Chemical Looping Enhanced Oil Shale-to-Liquid Fuels Process: Modeling, Parameter Optimization, and Performance Analysis

Modeling and simulation of NGLs-rich shale gas processing integrated with oxirane production

Thermodynamic Analysis of a Solar Thermochemical Cycle-Based Direct Coal Liquefaction System for Oil Production

Kinetics study on supercritical water conversion of low-maturity shale for hydrogen-rich hydrocarbon gas generation

Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling

Experimental Investigation on Supercritical Water Gasification of Organic-Rich Shale with Low Maturity for Syngas Production

Analysis of Mechanisms and Environmental Sustainability in In Situ Shale Oil Conversion Using Steam Heating: A Multiphase Flow Simulation Perspective

Numerical and experimental investigation of production performance of in-situ conversion of shale oil by air injection

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment

Sustainable Process Design and Synthesis of Hydrocarbon Biorefinery Through Fast Pyrolysis and Hydroprocessing

Conceptual design and techno-economic analysis of a novel propane dehydrogenation process integrated with chemical looping combustion and CO 2 hydrogenation

Optimal Superstructure-Based Design And Synthesis Of Hydrocarbon Biorefinery Via Fast Pyrolysis, Hydrogen Production And Hydroprocessing Pathway

Techno-economic Analysis and Life Cycle Assessment of Coal-to-aromatics Process with Integration of Renewable Energy-Based Hydrogen Generation Technology

Hydrogen Production from Oilfield Wastewater by Gasification in Supercritical Water with a Continuous System

Hydro-upgrading of low-rank oil with CO2-containing H2 gas generated online from methanol steam reforming

Advanced exergoenvironmental analysis of the oil shale retorting process with SJ-type rectangular retort

System optimization and performance evaluation of shale gas chemical looping reforming process for efficient and clean production of methanol and hydrogen

Reaction pathways and kinetics for hydrogen production by oilfield wastewater gasification in supercritical water

Sub- and supercritical water conversion of organic-rich shale with low-maturity for oil and gas generation: Taking Chang 7 shale as an example

Energy‐effective carbon dioxide capture and storage design in hydrogen production from liquefied natural gas