Sub- and supercritical water conversion of organic-rich shale with low-maturity for oil and gas generation: Taking Chang 7 shale as an example

Qiuyang Zhao,Yu Dong,Lichen Zheng,Tian Xie,Baercheng Bawaa,Hui Jin,Liejin Guo
DOI: https://doi.org/10.1039/d2se01361d
2022-11-19
Abstract:Organic-rich shale resources are of large reserves and high hydrocarbon generation potential but difficult to be exploited due to its high solid kerogen content. Supercritical water conversion was proposed as an alternative method to convert kerogen into oil and gas because supercritical water has favorable solubility, dispersion and reactivity. In this paper, Chang 7 shale containing high TOC content of 15.11%, type II kerogen and low Ro of 0.36-0.38% in Ordos basin was taking as an typical exapmle of organic-rich shale with low-maturity. A series of experiments at the temperature of 300-650oC and the pressure of 25 MPa were carried out to test the feasibility, and the shale conversion performance was analyzed from three perspectives, hydrocarbon generation of kerogen, effect of inorganic minerals and shale pore evolution. The optimum oil and gas yields were respectively found to be 352.1 mg•(g TOC)-1 (g TOC refers to total organic carbon mass in shale) at 380oC and 852.0 mL•(g TOC)-1 at 650oC. Compared with pyrolysis in aluminium retort, supercritical water conversion raised the oil yield at the same temperature (171.4 mg•(g TOC)-1 at 380oC) or reduced the temperature with the same yield (346.8 mg•(g TOC)-1 at 520oC). Chang 7 shale minerals as a whole increased the oil yield by 34.2% at 380oC but had a negligible effect on gas generation. Among them, the carbonate (dolomite) promoted oil generation but inhibited gas generation while the silicates (feldspar, quartz and clay) did the opposite, and the pyrite favored both oil and gas generation. Additionally, supercritical water conversion significantly increased shale pore volume and specific surface area because hydrocarbons generation of kerogen produced many nanopores with slit-like shapes and diameters of 50-5000 nm. This paper provided an in-depth understanding of sub- and supercritical water conversion of low-maturity shale for oil and gas production.
materials science, multidisciplinary,chemistry, physical,energy & fuels
What problem does this paper attempt to address?