Abstract:This paper studies the dynamics of an atomic force microscopy (AFM) cantilever that is considered to be operating under continuous viscoelastic surface contact with material profiles based on the modified nonlocal theory of elasticity. The contact between the cantilever's tip and the sample surface is modeled using a linear stiffness–damper pair and a lumped mass at the beam's free end. The higher-order partial differential equation (PDE) governing the AFM nanocantilever transverse motion and its associated higher-order boundary conditions (BCs) are derived employing extended Hamilton's principle based on the nonlinear nonlocal higher-order constitutive relation in Euler–Bernoulli beam model. The Galerkin's decomposition method is applied to discretize the higher-order PDE and BCs of motion into a set of ordinary differential equations (ODEs) via the mode summation technique using eigenfunctions (mode shapes) of a classic cantilever thin beam. Then, using state-space form of ODEs of motion the frequency analysis is performed based on the eigenvalues of vibration motion. The obtained results are validated with the literature works. The impact of various parameters including nonlocal nanoscale elasticity parameter, added point mass, contact stiffness and viscous damping factors and the specific position where the concentrated mass and the contact stiffness–damper pair are attached to the beam on the resonant frequencies of AFM cantilever is comprehensively investigated. Numerical simulations showed that the resonance frequencies of the AFM cantilever increase by increasing the value of nonlocal nanoscale parameter. Also, it was concluded that an increase in the nonlocal parameter and surface contact stiffness leads the AFM cantilever to be more stiffened. Moreover, it was seen that by increasing the position distance of lumped mass on the beam and contact spring–damper pair from the beam's fixed end, the resonant frequency reduction in the larger values of the surface contact stiffness is more noticeable.

Flexural Vibration of an Atomic Force Microscope Cantilever Based on Modified Couple Stress Theory

Flexural resonant frequencies of an AFM cantilever in viscoelastic surface contact mode using modified nonlocal elasticity theory

Flexoelectric Control of Beams with Atomic Force Microscope Probe Excitation

Thermo-mechanical responses of a surface-coupled AFM cantilever.

Multiflexoelectric Actuation and Control of Beams

Investigation of the Photothermal Excited Microcantilevers Based on Modified Couple Stress Theory

Nonlinear Dynamics And Chaos Of Microcantilever-Based Tm-Afms With Squeeze Film Damping Effects

Experiments on the Deformation of MEMS Mciro-Cantilever Using AFM

Theoretical Analysis of Surface Stress for a Microcantilever with Varying Widths

Calibration of the Effective Spring Constant of Ultra-Short Cantilevers for A High-Speed Atomic Force Microscope

[On the Thermal Responses of a Rectangular AFM Cantilever Coupled Surface by the Elastic Biological Specimens].

Torsional Vibrations of A Cantilever with Lateral Friction in A Resonance Friction Microscope

Theoretical analysis and experimental study on the vibration of cantlilever

Nonlinear dynamics of cantilevered microbeams based on modified couple stress theory

Analyses of Natural Frequency and Electromechanical Behavior of Flexoelectric Cylindrical Nanoshells under Modified Couple Stress Theory

Flexible Helicoids, Atomic Force Microscopy (AFM) Cantilevers in High Mode Vibration, and Concave Notch Hinges in Precision Measurements and Research

Design of a Vibration Isolation Platform for Atomic Force Microscope Based on Flexural Structure

Effects of the Casimir Force and Surface Elasticity on the Natural Frequencies of Cantilever AFM Probes

Micro-/Nanosized Cantilever Beams and Mass Sensors under Applied Axial Tensile/Compressive Force Vibrating in Vacuum and Viscous Fluid

Research on Vibration of Atomic Force Microscope Piezoelectric Microcantilever Affecting Measuring Image

An updated model including the deflection history of microcantilever for characterizing cellular viscoelastic properties by AFM indentation-relaxation test