Abstract:Bifunctional initiators with two labile groups ( e g peroxides or azo groups) are frequently used in the polymer industry for the synthesis of vinyl polymers and resin curing In general, there are two types of bifunctional initiators: one is symmetrical bifunctional initiators containing two labile groups of equal structure, the other is unsymmetrical bifunctional initiators containing two labile groups of unequal structure One of the potential advantages of using bifunctional initiators is that high polymer molecular mass and high polymerization rate can be obtained simultaneously by controlling the initiator decomposition rate through optimal reaction temperature programming For free radical polymerization of methyl methacrylate (MMA) with monofunctional initiators, the kinetics is reasonably well understood in both low and high monomer conversion regimes However, the presence of an additional labile group in bifunctional initiators makes the polymerization kinetics very complicated. This is because labile groups such as peroxides become redistributed repeatedly in the growing and inactive polymers and they are engaged in further initiation, propagation, chain transfer and termination reactions during the course of polymerization. The effects of temperature and initiator concentration on the kinetics of MMA bulk polymerization initiated by 2,5 dimethyl 2,5 bis(2 ethyl hexanoyl peroxide) hexane (TX 141) were investigated.The energy of activation of MMA bulk polymerization initiated by TX 141 was about 91 kJ·mol -1 , and that of TX 141 decomposition was about 140 kJ·mol -1 , which was more close to the experimental data.The reaction order of TX 141 concentration was about 0 72,because there was mono and bi molecule termination. The kinetic comparison initiated by TX 141 and benzoyl peroxide (BPO) with the same half life period showed that the kinetics was the same when the concentration of TX 141 was half of that of BPO.But, the number average molecular mass ratio of that initiated by TX 141 to that by BPO was from 1 2 to 1 33 increasing with the conversion.There was an exothermal peak in the DSC curve of polymer initiated by TX 141 at low conversion, but there was no peak at high conversion and no peak was observed for the polymer initiated by BPO.It was shown that the two functional groups of bifunctional initiator decomposed at different times during the polymerization process.

Radical polymerization of methyl methacrylate with 2,2,3-triphenylpropanoic acid as an initiator

Alkyl Halide/tertiary Amine As Novel Initiators for Free Radical Polymerizations of Methyl Methacrylate, Methyl Acrylate and Styrene

Radical Polymerization of Methyl Methacrylate with Ethane-1,1,2-Triyltribenzene As an Initiator and Ethane-1,1,2-Triyltribenzene-End Polymers As Macroinitiators

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in emulsion

Allylthioketone Mediated Free Radical Polymerization of Methacrylates

Atom Transfer Radical Polymerization of Methyl Methacrylate Induced by an Initiator Derived from an Ionic Liquid

"Living" Radical Polymerization of Methyl Methacrylate Using CuBr as Catalyst in [Hmim][CH_3COO]

Neutral Pd(II) and Ni(II) Acetylide Catalysts for the Polymerization of Methyl Methacrylate

Kinetics of methyl methacrylate polymerization initiated by bifunctional initiator

In-Situ Heterogenous Polymerization of Methyl Methacrylateonto Nanometer Calcium Carbonate Particles

Optimization of initiator contents in room temperature polymerization of methyl methacrylate

Facile Synthesis of Ultrahigh Molecular Weight Poly(Methyl Methacrylate) by Organic Halides in the Presence of Palladium Nanoparticles

Direct Photolysis RAFT Polymerization of (metha)acrylate with 2‐cyano‐2‐propyldodecyl Trithiocarbonate (TTP) As Mediator

Synthesis of fluorescent poly(methyl methacrylate) via AGET ATRP

Polymerization mechanism of MMA in the presence of 1,1-diphenylethylene

Synthesis of Ultrahigh Molecular Weight Poly(methyl Methacrylate) via the Polymerization of MMA Initiated by the Combination of Palladium Carboxylates with Thiols

Synthesis and Characterization of Poly[4‐(2‐thiazolylazo)phenyl Methacrylate]‐co‐poly(methyl Methacrylate)

Dispersion Atom Transfer Radical Polymerization of Vinyl Monomers in Supercritical Carbon Dioxide

One-Pot Synthesis of Ptfema-B-Pmma-B-Ptfema by Controlled Radical Polymerization with A Difunctional Initiator in Conjugation with Photoredox Catalyst of Ir(Ppy)(3) under Visible Light

Synthesis of Methacrylate Macromonomers Using Silica Gel Supported Atom Transfer Radical Polymerization

A Plasma-Initiated Graft Polymerization of Methyl Methacrylate in the Presence of a Reverse ATRP Catalyst