Abstract:Bifunctional initiators with two labile groups ( e g peroxides or azo groups) are frequently used in the polymer industry for the synthesis of vinyl polymers and resin curing In general, there are two types of bifunctional initiators: one is symmetrical bifunctional initiators containing two labile groups of equal structure, the other is unsymmetrical bifunctional initiators containing two labile groups of unequal structure One of the potential advantages of using bifunctional initiators is that high polymer molecular mass and high polymerization rate can be obtained simultaneously by controlling the initiator decomposition rate through optimal reaction temperature programming For free radical polymerization of methyl methacrylate (MMA) with monofunctional initiators, the kinetics is reasonably well understood in both low and high monomer conversion regimes However, the presence of an additional labile group in bifunctional initiators makes the polymerization kinetics very complicated. This is because labile groups such as peroxides become redistributed repeatedly in the growing and inactive polymers and they are engaged in further initiation, propagation, chain transfer and termination reactions during the course of polymerization. The effects of temperature and initiator concentration on the kinetics of MMA bulk polymerization initiated by 2,5 dimethyl 2,5 bis(2 ethyl hexanoyl peroxide) hexane (TX 141) were investigated.The energy of activation of MMA bulk polymerization initiated by TX 141 was about 91 kJ·mol -1 , and that of TX 141 decomposition was about 140 kJ·mol -1 , which was more close to the experimental data.The reaction order of TX 141 concentration was about 0 72,because there was mono and bi molecule termination. The kinetic comparison initiated by TX 141 and benzoyl peroxide (BPO) with the same half life period showed that the kinetics was the same when the concentration of TX 141 was half of that of BPO.But, the number average molecular mass ratio of that initiated by TX 141 to that by BPO was from 1 2 to 1 33 increasing with the conversion.There was an exothermal peak in the DSC curve of polymer initiated by TX 141 at low conversion, but there was no peak at high conversion and no peak was observed for the polymer initiated by BPO.It was shown that the two functional groups of bifunctional initiator decomposed at different times during the polymerization process.

Polymerization mechanism of MMA in the presence of 1,1-diphenylethylene

Polymerization Mechanism in the Presence of 1,1‐diphenylethylene Part 2: Synthesis and Characterization of PMA and PSt

Optimization of initiator contents in room temperature polymerization of methyl methacrylate

Fundamental Study on Preparation Process and Structure Coutrol of PBA/PMMA

Particle Features of A Poly(Methyl Methacrylate) Resin Prepared by A New Emulsion Polymerization Process

Kinetics of Suspended Emulsion Polymerization of Methyl Methacrylate

Influences for Preparation of PMMA-b-PtBA Block Copolymer Mediated by DPE-containing Macroinitiator

Radical polymerization of methyl methacrylate with 2,2,3-triphenylpropanoic acid as an initiator

Neutral Pd(II) and Ni(II) Acetylide Catalysts for the Polymerization of Methyl Methacrylate

Kinetics of methyl methacrylate polymerization initiated by bifunctional initiator

Thermal Safety and Overall Kinetics for Methyl Methacrylate Solution Polymerization via On-line Process Analytical Technology

Preparation of Porous Pmma Resin by A New Emulsion Polymerization Process and the Mechanism of Particle Formation

Study of the radical polymerization mechanism and its application in the preparation of high-performance PMMA by reactive extrusion

Study of MMA Polymerization Initiated by Triethyborane and Its Usage As an Adhesive for PE-HD Sheets

Radical reaction extrusion copolymerization mechanism of MMA and N-phenylmaleimide and properties of products

Studies on the Mechanism of Methyl-Methacrylate Polymerization Initiated by Volatile and Nonvolatile Products of Methyl-Methacrylate Plasma

Synthesis of Ultrahigh Molecular Weight Poly(methyl Methacrylate) via the Polymerization of MMA Initiated by the Combination of Palladium Carboxylates with Thiols

Facile Synthesis of Ultrahigh Molecular Weight Poly(Methyl Methacrylate) by Organic Halides in the Presence of Palladium Nanoparticles

Radical Polymerization of Methyl Methacrylate with Ethane-1,1,2-Triyltribenzene As an Initiator and Ethane-1,1,2-Triyltribenzene-End Polymers As Macroinitiators

Kinetics of Methyl Methacrylate Polymerization Mediated by 4,4 '-Dimethoxydiphenyl Nitroxide

Methyl Methacrylate Polymerization Mediated by 4,4 '-Dimethoxydiphenyl Nitroxide Free Radicals