Abstract:Abstract Heat pipes are passive heat transfer systems and serve as an effective thermal management solution for electronic devices. The adaptability of heat pipes makes these suited for a wide application range, especially in the field of electronic thermal management. The current study highlights the transient numerical analysis of wickless heat pipes (thermosyphons) for the thermal management of electronic devices. The thermal performance of the thermosyphon is analyzed using both copper oxide (CuO) and aluminum oxide (Al2O3) nanofluids with their concentrations at 1% and 5%. Deionized (DI) water is employed as a reference case for comparison. The study is carried out for variable heat inputs to the thermosyphon ranging 10–50 W for a time interval of 30 s. The idea is to analyze the effect of the evaporator heat input and the nanoparticles concentration on the temperature, heat transfer coefficient, thermal resistance, and effective thermal conductivity of the heat pipe. The results indicate that CuO nanoparticles at a 5% concentration lead to a maximum thermal resistance reduction of 4.31% at 50 W, while alumina nanoparticles at the same concentration lead to a more substantial reduction of 6.66% at the same heat load. The evaporator temperature varies between 377.52 K to 374.99 K using deionized water, and 376.95 K to 374.29 K using CuO nanofluid (at 1% concentration). The heat pipe's evaporator attains its highest convective heat transfer coefficient (437.91 W/m2K) by using alumina nanofluid with 1% nanoparticle concentration at 50 W. Moreover, the effective thermal conductivity of the heat pipe is enhanced by 5% and 7% for copper oxide and aluminum oxide nanofluids (with 5% concentration), respectively, at 50 W. Thus, the nanofluids play a significant role in improving the efficiency and reliability of electronic components. These findings demonstrate the potential of using the nanofluids in thermosyphons to enhance their thermal performance in electronic cooling applications.

Thermal Performance of a Miniature Loop Heat Pipe Using Water–copper Nanofluid

Experimental investigation of a loop heat pipe with a flat evaporator and cupric oxide nanofluids as working fluid

Experimental Investigation on the Heat Transfer Performance and Evaporation Temperature Fluctuation of a New-Type Metal Foam Multichannel Heat Pipe

Simulation of Steady-State Operation of an Ejector-Assisted Loop Heat Pipe with a Flat Evaporator for Application in Electronic Cooling

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

Enhancement of Loop Heat Pipe Performance with the Application of Micro/nano Hybrid Structures

Effects of Hybrid Nanofluids on the Thermal Performance of Heat Pipe: An Experimental Investigation

Effects of Nanoparticle Parameters on Thermal Performance of the Evaporator in A Small Capillary Pumped Loop Using Nanofluid

Experimental investigation on the thermal performance of a novel loop heat pipe (LHP) with micro-channel structure

Application of Cu-water and Cu-ethanol Nanofluids in a Small Flat Capillary Pumped Loop

Analysis of the mechanism of enhanced heat transfer by nanofluids

Heat Transfer Characteristics of a New Type of Copper Wire-Bonded Flat Heat Pipe Using Nanofluids

Comparative Study on Thermal Performance of Ultrathin Miniature Loop Heat Pipes with Different Internal Wicks

A Study on Thermal Performance of a Pump-Assisted Loop Heat Pipe with Ammonia As Working Fluid

Application of aqueous nanofluids in a horizontal mesh heat pipe

Numerical Investigation on Thermal Performance of Nanofluid-Assisted Wickless Heat Pipes for Electronic Thermal Management

Experimental Investigation of Thermal Performance of Miniature Heat Pipe Using SiO2-Water Nanofluids

Experimental Study of a Novel Loop Heat Pipe with a Vapor-Driven Jet Injector and a Boiling Pool

High Performance Copper-Water Heat Pipes with Nanoengineered Evaporator Sections

Experimental Investigation Thermal Performance of Loop Heat Pipe Operating with Different Working Fluids

Heat Transfer and Nanofluids Flow Through the Circular Concentric Heat Pipes: a Comparative Study Using Least Square Method (LSM)