Abstract:Abstract Internal cooling structures for gas turbine engines are becoming more complicated to push the hot gas temperature as high as possible, which, however, allows particulates drawn into the coolant air to be more readily to deposit within these passages and thus greatly affect their flow loss and thermal performance. In this study, internal swirl cooling and jet impingement cooling subjected to particulate deposition were evaluated and compared using a conjugate heat transfer method, with an emphasis on the thermal effects of the insulative deposits. To accomplish the goal, an unsteady conjugate mesh morphing simulation framework was developed and validated, which involved particle tracking in an unsteady fluid flow, particle–wall interaction modeling, conjugate mesh morphing of both fluid and solid domains, and a deposit identification method. The swirl and the jet impingement cooling configurations modeled the internal cooling passage for the leading-edge region of a turbine blade and were investigated in a dust-laden coolant environment at real engine conditions. Coupling effects between the dynamic deposition process and the unsteady flow inside the two cooling channels were examined and the insulative effects of the deposits were quantified by comparing the temperatures on the external and internal surfaces of the metal channel walls, as well as on the deposit layers. Results demonstrated the ability of the newly developed, unsteady conjugate simulation framework to identify the deposits from the original bare wall surface and to predict the insulation effects of the deposits in the dynamic deposition process. The dust almost covered the entire impingement channel, while deposits were only seen in the vicinity of the jets in the swirl channel. Despite this, a dramatical decrease of convection heat transfer was found in the swirl channel because the swirling flow was sensitive to the interruption of the deposits. In contrast, the deposits improved the heat transfer rate in the impingement channel. When the thermal effects of the deposit layer were taken into account, the wall temperatures of both two cooling geometries were substantially elevated, exceeding the allowable temperature of the metal material. Due to the denser deposit coverage, the impingement channel wall had a greater temperature increase than the swirl channel. In terms of flow loss, the presence of the deposits inhibited the swirl intensity by interrupting the swirling flow and thus reduced the friction loss, whereas the pressure loss was improved by the deposits in the impingement cooling.

Conjugate heat transfer analysis of leading edge and downstream mist–air film cooling on turbine vane

Conjugate heat transfer simulation of turbine blade high efficiency cooling method with mist injection

Research on heavy-duty gas turbine vane high efficiency cooling performance considering coolant phase transfer

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

The Comparative Study Between Swirl and Impingement of Mist/Air Cooling on Blade Leading Edge

Numerical investigation of mist/air impingement cooling on ribbed blade leading-edge surface

Conjugate Heat Transfer Evaluation of Turbine Blade Leading-Edge Swirl and Jet Impingement Cooling With Particulate Deposition

Conjugate Heat Transfer Investigation on Swirl-Film Cooling at the Leading Edge of a Gas Turbine Vane

Numerical Simulation for Heat Transfer Properties at Trailing Edge of Gas Turbine Airfoils

Accurate predictions of mist assisted film cooling characteristics and effectiveness on a flat plate with double-row holes

Experimental and numerical investigations of overall cooling effectiveness on a vane endwall with jet impingement and film cooling

Numerical analysis of vane endwall film cooling and heat transfer with different mainstream turbulence intensities and blowing ratios

Conjugate Heat Transfer Predictions on Combined Impingement and Film Cooling of a Blade Leading Edge Model

Data-Driven Conjugate Heat Transfer Analysis of a Gas Turbine Vane

Heat transfer enhancement by mist/air two-phase flow in a high-temperature channel

Experimental investigation on the combined cooling methods of jet impingement and film cooling for the pressure surface of the turbine vane leading cavity

Investigation of Applicability of Transporting Water Mist for Cooling Turbine Blades

Heat transfer and flow structure characteristics of film-cooled leading edge model with sweeping and normal jets

Numerical Study on Flow and Heat Transfer of a Cooled First Stage Vane of a Gas Turbine

Numerical Investigation of the Cooling Flow Downstream of a Turbine Guide Vane Trailing Edge Slot

Multi-jet impingement cooling in the leading edge of turbine blade using matrix as internal structure