Abstract:The drilling tasks in hydraulic engineering were usually under severe conditions.In the narrow closed cavity, the normal DTH hammer drilling technique was generally applied to drill boreholes,but dust pollution will seriously affect the working environment and workers’health.To solve the dust pollution in the cavity,reverse circulation drilling technique with DTH air hammer was firstly applied to drill the drain holes in the cavity of a hydropower station, and the upward and downward holes were successfully drilled.The reverse drilling technique with DTH air hammer can control and reduce the dust pollution in the cavity.Furthermore,this technique can maintain good working environments.Two types of drill bits with different structures were designed for test,which were named as type A and B,respectively.The main difference between type A and B drill bits were the positions of suction nozzles.The suction nozzles of type A drill bit were evenly distributed between any two flat keys of the spline.While the suction nozzles of type B were distributed on every flat key of the spline.The CFD numerical simulation results had shown that the air suction rate in annular space of type A drill bit was 0.199 987 04 kg/s,which is slightly larger than that of type B drill bit with a air suction rate of 0.177 524 64 kg/s in annular space between drilling tool and borehole wall .In other words,type A drill bit can suck more air from the annulus space.The test results on drilling upward and downward holes indicated that the structure of drill bit which has double row with 1 2 suction holes on the spline had the stronger suction capacity and better reverse circulation effect of the slag discharge. Therefore,there was less dust in the cavity and more rock cuttings discharged from the central channel while using type A drill bit.In hence,the reverse circulation discharging effect of type A drill bit is superior to that of type B drill bit.

Development Of A Specially Designed Drill Bit For Down-The-Hole Air Hammer To Reduce Dust Production In The Drilling Process

Rock-Breaking Mechanism Study of Axial and Torsional Impact Hammer and Its Application in Deep Wells

Study on Dust Control Performance of a Hammer Drill Bit

Parametrical Design and Optimization of a Reverse Circulation Drill Bit for Dust Control

Design and Numerical Analysis of a Large‐diameter Air Reverse Circulation Drill Bit for Reverse Circulation Down‐the‐hole Air Hammer Drilling

Insight into dust control performance of a reverse circulation drill bit using multiphase flow simulation

Application Test of DTH Hammer Reverse Circulation Drilling Technique in a Hydropower Station

Design and optimization of switchable reverse circulation DTH air hammer bits

Numerical simulation and optimization of structural parameters on large-diameter air reverse circulation DTH hammer bit

Simulation and Analysis of a Split Drill Bit for Pneumatic DTH Hammer Percussive Rotary Drilling

Optimum Design of Large-Diameter Reverse Circulation Drill Bit for Drilling Rescue Wells Using Orthogonal Experimental Method and CFD Simulation

Development and Application of Drilling System on a New Generation of Large Diameter Pneumatic Down-the-hole Hammer

Experimental Study on Reverse Circulating Bit of Air DTH Hammer

Analysis on the Bottomhole Flow Field and Structural Optimization of Air Reverse Circulation Drill Bit

Experimental and Numerical Study on Air Flow Behavior for a Novel Retractable Reverse Circulation Drill Bit of Casing-while-Drilling (CwD)

Development of SGQ-320 Type Reverse Circulation DTH Hammer Used in Gas Drilling

Design of Drill Bits with Diamond Positioning Arrangement

Research on suction capacity and dust suppression performance of a reverse circulation air hammer in tunnel drilling

Reverse Circulation Drilling Method Based on A Supersonic Nozzle for Dust Control

Application of Air Hammer Bit

Design optimization and feasibility analysis of pneumatic DTH Hammer with self-rotation bit