Abstract:Cu(In,Ga)Se<sub>2</sub> (CIGS) solar cells attract intense interest both in research and industry fields due to their high power conversion efficiencies, low costs, and high stabilities. The power conversion efficiency of a CIGS solar cell is limited by the deep level defects distributed on the surface and in the bulk of the CIGS solar cells. In this work, we elucidate that the deep level defects are significantly suppressed during the CdS buffer layer deposition process via a chemical bath deposition (CBD) method. The X-ray photoelectron spectroscopy results show the incorporation of cadmium (Cd) into CIGS during the CdS deposition process, which is the main reason for the reduced deep level nonradiative recombination defects. Raman spectroscopy and secondary ion mass spectroscopy further reveal the reduction of nonradiative recombination deep level defects due to Cd incorporation. Besides, the high-resistivity i-ZnO layer provides field-effect passivation, leading to the enhancement of the power conversion efficiency from 11.0 to 12.1%. By a combination of the incorporation of Cd, i-ZnO passivation, and optimization of the band gap of CIGS, the champion power conversion efficiency of the CIGS solar cell is as high as 15.5% without an antireflective layer and alkali metal postdeposition treatment. Our results provide insights into the effect of the CdS buffer layer, CBD method, and high-resistivity i-ZnO layer on the performance of CIGS solar cells, which is quite helpful to further improve the power conversion efficiency of CIGS solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01930</a>.CIGS coevaporation deposition process; CdS CBD deposition; characterizations; top-view SEM images of CdS deposited via chemical bath deposition for different times; XRD pattern of CdS fabricated via a CBD method at 80 °C for 12 min; parameters for the simulations of the performance of CIGS solar cells with different thicknesses of i-ZnO; and EQE curves of CIGS solar cell obtained at 0, 0.5, −0.5, and 1 V DC voltage bias (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01930/suppl_file/ae0c01930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficiency Enhancement of Cu(In, Ga)Se-2 Solar Cells by Applying Sio2-Peg/Pvp Antireflection Coatings

Mechanically Robust and Self-Cleaning Antireflective Coatings for Photovoltaic Modules

Efficiency Enhancement of CIGS Solar Cells via Recombination Passivation

Optoelectronic Effects of Copper–Indium–Gallium–Sulfur (CIGS2)-Solar Cells Prepared by Three-Stage Co-Evaporation Process Technology

Efficiency enhancement of copper indium gallium selenide solar cells fabricated on polyimide foils with multiple metal layers

New Solution-Processed Surface Treatment to Improve the Photovoltaic Properties of Electrodeposited Cu(In,Ga)Se 2 (CIGSe) Solar Cells

Optimization of CuInGaSSe properties and CuInGaSSe/CdS interface quality for efficient solar cells processed with CuInGa precursors

Improving the efficiency of CIGS solar cells using an optimized p-type CZTSSe electron reflector layer

Enhancing the light absorbance of polymer solar cells by introducing pulsed laser-deposited CuIn0.8Ga0.2Se2 nanoparticles.

10.3%-Efficient Submicron-Thick Cu(In,Ga)Se2 Solar Cells with Absorber Fabricated by Sputtering In2Se3, CuGaSe2 and Cu2Se Targets

Efficiency improvement of electrodeposition-processed Cu(In,Ga)Se2 solar cell with widen surface bandgap by spin-coating In2S3 thin film

Strategies to Enhance the Performance of Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells by Doping Approaches

Ameliorating Properties of Perovskite and Perovskite–Silicon Tandem Solar Cells via Mesoporous Antireflection Coating Model

Influence of Silicon Oxide Processes on the Performance of Copper Indium Gallium Selenide Flexible Solar Cells

Surface Modification of Cu(in,Ga)Se2 Film with a Post‐Deposition Treatment Using a KI Solution and Its Effect on Solar Cell Performance

Bilayer Broadband Antireflective Coating to Achieve Planar Heterojunction Perovskite Solar Cells with 23.9％Efficiency

Interface passivation and band alignment of high efficiency Cu(In, Ga)Se2 solar cells: Application of Mo(OxSe1-x)2 buffer layer at Mo/ Cu(In, Ga)Se2 interface

Development of sol-gel derived gahnite anti-reflection coating for augmenting the power conversion efficiency of polycrystalline silicon solar cells

Efficiency improvement for post-sulfurized CIGS solar cells enabled by in situ Na doping

Photoinduced Field-Effect Passivation From Negative Carrier Accumulation for High Efficiency Silicon/Organic Heterojunction Solar Cells.

Interface Engineering for High-Efficiency Solution-Processed Cu(In,Ga)(S,Se)2 Solar Cells via a Novel Indium-Doped CdS Strategy