Abstract:We studied the influence of the gelation conditions on the formation kinetics of the polyphthalazine ether sulfone ketone (PPESK) membrane via wet phase inversion process experimentally and theoretically. Membrane formation and its morphology were first observed with an online optical microscope - CCD camera system. The resulting membranes prepared under various gelation conditions were then characterized by the gelation parameter, optical microscope, and SEM. Lastly, the relationship between the final membrane structure/permeation properties and the gelation parameter was discussed extensively. The results showed that both the gelation rate and the membrane flux increased dramatically as the gelation temperature increased. Moreover, the membrane structures became loose, and the porosity of membrane increased. Different non-solvent could change the solubility parameter between the polymer and the non-solvent, and thus the gelation rate greatly. With the increasing number of carbons in non-solvent, the gelation rate became slow, and the membrane gradually changed from a finger structure into a sponge structure. Adding NMP into the non-solvent changed the difference in the chemical potential and the solubility parameter between the polymer solution and the non-solvent, which in turn changed the gelation rate of polymer solution greatly. With the increasing concentration of NMP in non-solvent, the gelation rate became very slow and sponge structures formed with the non-solvent system of 80% NMP. A novel conclusion could be made that we could control the flux and reject of membrane just by changing the mean diffusion coefficient of skin, D, and the diffusion coefficient of skin, D1, in the process of membrane formation.

Preparation of a Poly(phthalazine Ether Sulfone Ketone) Membrane with Propanedioic Acid As an Additive and the Prediction of Its Structure

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Preparation of poly(phthalazinone-ether-sulfone) sponge-like ultrafiltration membrane.

Composite Membranes of Sulfonated Poly(phthalazinone Ether Ketone) Doped with 12-Phosphotungstic Acid (H3PW12O40) for Proton Exchange Membranes

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

EFFECT OF ADDITIVES ON THE STRUCTURES AND PROPERTIES OF POLY (PHTHALAZINE ETHER SULFONE KETONE)(PPESK) ULTRAFILTRATION MEMBRANE

Poly (phthalazinone Ether Sulfone Ketone) Properties and Their Effect on the Membrane Morphology and Performance

Random-design method for preparation of phenodiazine polyether-sulfone-ketone membranes

Performance Control of Asymmetric Poly(phthalazinone Ether Sulfone Ketone) Ultrafiltration Membrane Using Gelation

Formation kinetics and characterization of polyphthalazinone ether ketone hollow fiber ultrafiltration membranes

Effects of Coagulant Ph and Ion Strength on the Dehydration and Self-Assembly of Poly(N, N-Dimethylamino-2-Ethyl Methacrylate) Chains in the Preparation of Stimuli-Responsive Polyethersulfone Blend Membranes

Preparation and characterization of improved fouling-resistant PPESK ultrafiltration membranes with amphiphilic PPESK-graft-PEG copolymers as additives

The Preparation and Characterization of Novel Charged Polyacrylonitrile/pes-C Blend Membranes Used for Ultrafiltration

Development of High-Antifouling PPSU Ultrafiltration Membrane by Using Compound Additives: Preparation, Morphologies, and Filtration Resistant Properties.

Gelation Kinetics of Phenodiazine Polyether - Sulfone - Ketone Membrane Formation Via Phase Inversion( Ⅱ ) Effect of Quench Bath on Gelation Rate of PPESK Membrane Fromation

Effect of PEG Additives on Properties and Morphologies of Polyetherimide Membranes Prepared by Phase Inversion

Synthesis and Characterization of Sulfonated Poly(arylene Ether Ketone/ketone Phosphine Oxide)s As Proton Exchange Membranes

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Amphiphilic PPESK-graft-P(PEGMA) copolymer for surface modification of PPESK membranes

Microporous Polyethersulfone Membranes Prepared under the Combined Precipitation Conditions with Non-Solvent Additives