Abstract:Wet-processable and highly conductive polymers are promising candidates for key materials in organic electronics. Poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), commercially available as a water dispersion of colloidal particles, has potential applications to organic electronics because of its high electrical conductivity, transparency and thermal stability 1) . However, the PEDOT:PSS has some technical issues owing to the PSS: The ultra-thin layers thinner than the colloidal particle size is difficult; The PEDOT:PSS colloids aggregate and precipitate when stored for an extended period; The pristine PEDOT:PSS exhibits poor electrical conductivity without secondary dopants such as ethylene glycol and DMSO. Recently, we have developed a novel fully soluble self-doped PEDOT (S-PEDOT) by chemical oxidative polymerization having a high conductivity without secondary dopants 2) . This presentation deals with the first study on synthesis of the S-PEDOT by a facile electrochemical polymerization and characterization by means of cyclic voltammetry (CV), reflection spectroscopy, X-ray diffraction analysis (XRD), and the four-point technique. The S-PEDOT was electrochemically synthesized at different current densities ranging from 0.5 to 5 mA/cm 2 . It was found that the electrical conductivity increased with increasing current density and attained as high as 427 S/cm at 5 mA/cm 2 which was one order of magnitude higher than those so far reported in the literature. Further investigation has been made to clarify the role and effect of current density on molecular weight, crystallinity, and carrier transport properties in more detail. For the application to biosensors, flexible organic electronic circuits consisting of working, counter, and reference electrodes were fabricated by line-patterning 3) the S-PEDOT water solution as a conductive ink on a Kapton film as a flexible substrate. The flexible glucose sensor was then fabricated by coating the bioink containing glucose oxidase, ferrocene, and chitosan on the working electrode. It was found that the flexible biosensor successfully worked where the electric current during the CV measurement increased with increasing the glucose concentration. 1) H. Okuzaki ed., PEDOT: Materials Properties and Device Applications, S&T (2012). 2) H. Yano, K. Kudo, K. Marumo, H. Okuzaki, Sci. Adv., 5, eaav9492 (2019). 3) D. Hohnholz, H. Okuzaki, and A. G. MacDiarmid, Adv. Funct. Mater., 15, 51 (2005).

Synthesis And Characterization Of Pedot Derivative With Carboxyl Group And Its Chemo Sensing Application As Enhanced Optical Materials

Synthesis and Electrochemical Sensing Application of Poly(3,4-Ethylenedioxythiophene)-based Materials: A Review

Electrosynthesis and Characterization of Aminomethyl Functionalized PEDOT with Electrochromic Property

Facile Synthesis of ZIF-8@poly(3,4-ethylenedioxythiophene):poly (4-Styrenesulfonate) and Its Application As Efficient Electrochemical Sensor for the Determination Dichlorophenol

Synthesis of Novel Chiral L-Phenylalanine Grafted PEDOT Derivatives with Electrochemical Chiral Sensor for 3,4-Dihydroxyphenylalanine Discrimination

Synthesis and Characterization of D -/ L -Methionine Grafted PEDOTs for Selective Recognition of 3,4-Dihydroxyphenylalanine Enantiomers

High Performance Electrochemical Electrode Based on Polymeric Composite Film for Sensing of Dopamine and Catechol

Electrochemical And Optical Properties Of The Poly(3,4-Ethylenedioxythiophene) Film Electropolymerized In An Aqueous Sodium Dodecyl Sulfate And Lithium Tetrafluoroborate Medium

Electrochemical Synthesis of Self-Doped Poly(3,4-ethylenedioxythiophene) and Application to Flexible Biosensors

Three-dimensional PEDOT Composite Based Electrochemical Sensor for Sensitive Detection of Chlorophenol

Application of PEDOT:PSS and Its Composites in Electrochemical and Electronic Chemosensors

Polymerization of PEDOT/PSS/Chitosan-Coated Electrodes for Electrochemical Bio-Sensing

Strongly Coupled Ceo2/Co3o4/Poly(3,4-Ethylenedioxythiophene) Nanofibers With Enhanced Nanozyme Activity For Highly Sensitive Colorimetric Detection

Synthesis and Characterization of Benzenesulfonate Derivatives Doped Poly(3,4-Ethylenedioxythiophene) Films and Their Application in Electrocatalysis

Synthesis and characterization of p-toluenesulfonate incorporated poly(3,4-ethylenedioxythiophene)

Poly(3,4-Ethylenedioxythiophene) Derivatives with Electrochemical Chiral Sensor for 3,4-Dihydroxyphenylalanine Discrimination

New spacious SrWO4/PEDOT-PPy nanohybrids and their electrochemical and photocatalytic activities

Electrochemical SERS for in Situ Monitoring the Redox States of PEDOT and Its Potential Application in Oxidant Detection.

Effect of Chalcogen Substitution on Aqueous Dispersions of Poly(3,4-Ethylenedioxythiophene)s:Poly(4-styrenesulfonate) and Their Flexible Conducting Films

Cost-effective preparation and sensing application of conducting polymer PEDOT/ionic liquid nanocomposite with excellent electrochemical properties

Electrochemical Preparation of Covalently Bonded PEDOT ‐ Graphene Oxide Composite Electrochromic Materials Using Thiophene‐2‐methylanine As Bridging Group