Abstract:A simple spray approach to fabricate superhydrophobic coatings on tile and glass substrates is presented. Commercial available polyphenylene sulfide (PPS) and hydrophobic silica (H-SiO(2)) powder were suspended in ethanol and the mixed suspensions were spray on substrates. After dried at different temperatures, surface coatings with different hydrophobicity were obtained. By observing the surface morphologies with scanning electron microscope (SEM) and atomic force microscope (AFM), and measuring water contact angles with a contact angle system, factors affecting the morphology, roughness and contact angle of the surface coatings, such as thermal treatment temperature and the weight ratio of H-SiO(2) to PPS, were investigated in detail. With the increase of the thermal treatment temperature, both the surface roughness and the contact angle increased when the temperature was lower than 280 degrees C. As the weight ratio of H-SiO(2) to PPS rose from 1: 10 to 1:1, more H-SiO(2) powders accumulated on the surface, leading to a significant increase of hydrophobicity. The surface coating obtained at 280 degrees C with the weight ratio of H-SiO(2) to PPS 1:1 showed a water contact angle higher than 150 degrees and a sliding angle lower than 4, exhibiting fascinating superhydrophobic properties. The surface coating could remain superhydrophobicity upon a further increase in thermal treatment temperature or the amount of H-SiO(2) powder. Moreover, the surface coatings showed high contact angles, larger than 150, for all the solutions with pH ranging from 1 to 14. The abrasion resistant property of the as-prepared superhydrophobic surface coating was tested using a homemade setup. Being scraped by freely-falling sands, the superhydrophobic coating could keep its high hydrophobicity, while a commercial hydrophobic coating transformed from hydrophobicity to hydrophilicity. This result implied our superhydrophobic surface coating was very stable. Moreover, chalk powders on the superhydrophobic surface coatings could easily be washed off with water, indicating good self-cleaning properties. The presented approach is convenient and can be potentially applied in fabrication of superhydrophobic surfaces in large scale.

Transparent and Durable SiO2‐containing Superhydrophobic Coatings on Glass

Transparent Superhydrophobic and Self-Cleaning Coating

Facile Fabrication of Superhydrophobic Polymethyltriethoxysilane- Polymethylhydrosiloxane Coatings

Superhydrophobic Polyurethane and Silica Nanoparticles Coating with High Transparency and Fluorescence

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

PREPARATION AND PROPERTIES OF SUPERHYDROPHOBIC POLYPHENYLENE SULFIDE COMPOSITE COATINGS

Durable Superhydrophobic/Highly Oleophobic Coatings From Multi-Dome Sio2 Nanoparticles And Fluoroacrylate Block Copolymers On Flat Substrates

One-step Spraying to Fabricate Nonfluorinated Superhydrophobic Coatings with High Transparency

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Synthesis and Properties of Transparent Superhydrophobic and Oleophobic Coatings

Fabrication of A Transparent Superamphiphobic Coating with Improved Stability

Fabrication of Transparent Wear-Resistant Superhydrophobic SiO2 Film Via Phase Separation and Chemical Vapor Deposition Methods

Transparent Oil-Water Separating Spiky SiO2 Nanoparticle Supramolecular Polymer Superhydrophobic Coatings

Super-Hydrophobic/Icephobic Coatings Based on Silica Nanoparticles Modified by Self-Assembled Monolayers

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

An Eco-Friendly and Durable Anti-Fogging Coating Based on Sulfobetaines and Silicones

Low-cost preparation of durable, transparent, superhydrophobic coatings with excellent environmental stability and self-cleaning function

Fabrication of superhydrophobic transparent coatings prepared by spraying dual-sized silica particles

Eco-Friendly Fabrication of Transparent Superhydrophobic Coating with Excellent Mechanical Robustness, Chemical Stability, and Long-Term Outdoor Durability.

Superhydrophobic and Transparent Coatings Prepared by Self-Assembly of Dual-Sized Silica Particles

Superhydrophilic and Antireflective Properties of Silica Nanoparticle Coatings Fabricated Via Layer-by-Layer Assembly and Postcalcination