Abstract:<p>Superamphiphobic coatings have attracted great attention in academia and industry. However, the fabrication of durable superamphiphobic coatings with high repellency towards liquids with low surface tension and high viscosity is still very challenging. Here, we report a simple method for the fabrication of durable superamphiphobic coatings with high static and dynamic repellency to such liquids. First, a homogeneous suspension was fabricated by hydrolytic condensation of silanes in the presence of the chain-like aggregates of SiO<sub>2</sub> nanoparticles. Subsequently, the superamphiphobic coatings were fabricated by spray-coating the polyurethane adhesive onto the substrates followed by spray-coating the as-prepared suspension onto the polyurethane adhesive layer. The coatings show high repellency to liquids with low surface tension and high viscosity, e.g., high apparent contact angles, low sliding angles, high impact resistance, low horizontal deformation and fast rolling velocity. Furthermore, the coatings show excellent mechanical durability against intensive sandpaper abrasion (60 m of abrasion under 10.5 kPa), water impact (60 min under 100 kPa) and tape peeling (200 cycles). The coatings also exhibit good aging stability. Based on these merits, the superamphiphobic coatings may have great potentials in various applications, e.g., handling with natural and synthetic polymer solutions.</p>

What problem does this paper attempt to address?

The paper mainly aims to address the following key issues: 1. **Preparation of superhydrophobic coatings with high static and dynamic repellency**: It is currently challenging to prepare durable superhydrophobic coatings with high static and dynamic repellency for low surface tension and high viscosity liquids. This paper reports a simple method to prepare such coatings. 2. **Improving mechanical durability**: Although many superhydrophobic surfaces have been reported, most of these surfaces have weak mechanical durability and can be damaged under slight friction, limiting their potential in practical applications. This paper improves the mechanical durability of the prepared coatings through a "paint + adhesive" method. 3. **Enhancing repellency to high viscosity liquids**: Previous studies have mostly focused on the static wettability of pure liquids (such as water and hexadecane), while in practical applications, complex and highly viscous liquids are often encountered. This paper specifically focuses on the repellency to complex liquids such as high viscosity polymer solutions. 4. **Improving dynamic superhydrophobicity**: In addition to static wettability, this paper also focuses on the performance of the coatings under dynamic conditions, such as the repellency during liquid impact, which is crucial for many practical application scenarios. To achieve the above goals, the researchers first prepared a fluorinated polysiloxane-functionalized silica nanoparticle suspension and applied it to substrates by spraying a polyurethane adhesive and the aforementioned suspension to form a superhydrophobic coating. Experimental results show that the coating can effectively repel low surface tension and high viscosity liquids, and it has good mechanical durability and aging resistance. Additionally, the coating can withstand high-speed liquid impacts without losing its self-cleaning properties. These characteristics make the superhydrophobic coating have broad application prospects in handling natural and synthetic polymer solutions.

Durable superamphiphobic coatings with high static and dynamic repellency towards liquids with low surface tension and high viscosity