Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Substrate-versatile approach to multifunctional superamphiphobic coatings with mechanical durable property from quartz sand

Durable superamphiphobic coatings with high static and dynamic repellency towards liquids with low surface tension and high viscosity

A robust, room-temperature curable and molecular-level superhydrophobic coating with excellent antibacterial and antifouling properties

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Robust and transparent superamphiphobic coating prepared via layer-by-layer spraying

Rational fabrication of high-durability superhydrophobic coatings based on the excellent compatibility between nanoparticles and polymers

Facile Preparation of Robust Superamphiphobic Coatings on Complex Substrates via Nonsolvent-Induced Phase Separation

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

A Waterborne Coating System for Preparing Robust, Self‐healing, Superamphiphobic Surfaces

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Facile Fabrication of a Mechanical, Chemical, Thermal, and Long‐Term Outdoor Durable Fluorine‐Free Superhydrophobic Coating

Ecofriendly fabrication of superhydrophobic coating with high chemical/mechanical durability and enhanced heat resistance by 1D/2D hybridization strategy

Sprayable superhydrophobic coating with high mechanical/chemical robustness and anti-corrosion

Dual hydrophilic/hydrophobic SiO2 transparent super-hydrophobic coating with good interfacial adhesion and high mechanical robustness

Superhydrophobic Composite Coating with Excellent Mechanical Durability

Preparation of superhydrophobic coatings with excellent mechanical and chemical stability by one-step spraying method with selected fluorine-free modifiers

Functional and versatile superhydrophobic coatings via stoichiometric silanization

Heating repairable superamphiphobic coatings for long-lasting antifouling application

Synthesis and self-cleaning properties of superamphiphobic coatings based on burr-like copolymer particles