Abstract:A low-frequency acoustic sensor based on fiber optic interferometer was designed and fabricated for detection of infrasound signals with a frequency less than 20 Hz. The sensor contains a metallic diaphragm that is a circular nickel membrane with a thickness of 5 mu m and a radius of 1/2 inch (1 inch=2.54 cm), and the diaphragm is flatly fixed to a port of the metal cylinder in a peripherally stretched manner. The end face of the single-mode fiber protruding into the cylinder and the inner surface of the diaphragm constitute an extrinsic fiber Fabry-Perot interferometer (EFPI) for detecting the diaphragm's vibration caused by sound. In order to optimize the sensor performance, the effects of the prestress applied to the diaphragm and the diaphragm thickness on the first-order resonant frequency of the sensor are analyzed based on the principle of elastic mechanics and finite element simulation software. The simulation results show that the first-order resonant frequency is sensitive to prestress rather than to the diaphragm thickness under the condition of the diaphragm thickness being within a certain small range. The above-prepared fiber optic infrasound sensor was characterized with the B&K 4193-L-004 standard acoustic sensor and the 42AE standard infrasound source. The results show that the sensor has good frequency response in the range from 0.1 Hz to 20 Hz and the sensitivity to 1 Hz sound is as high as 285 mV/Pa.

Thin Silica Diaphragm Based Fiber Optic Acoustic Sensors

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

All-Fiber Ultrasonic Sensor Based On Ultrathin Silica Reflective Diaphragm

Diaphragm-type Fiber-Optic Interferometric Acoustic Sensor

An Acoustic Sensor Based on Active Fiber Fabry-Pérot Microcavities

High-sensitivity Fiber Optic Acoustic Sensors

High Sensitivity Diaphragm-Based Extrinsic Fabry-Perot Interferometric Optical Fiber Underwater Ultrasonic Sensor

Diaphragm Based Long Cavity Fabry–Perot Fiber Acoustic Sensor Using Phase Generated Carrier

Fiber Optic Sensors for Partial Discharge Monitoring in Power Transformers

High-Sensitivity Fabry-Perot Interferometric Acoustic Sensor for Low-Frequency Acoustic Pressure Detections

Ultra-thin DLC diaphragm-based optical fiber sensor achieving a highly sensitive and broadband acoustic response

High Sensitivity and High Stability Dual Fabry-Perot Interferometric Fiber-Optic Acoustic Sensor Based on Sandwich-Structure Composite Diaphragm

A fiber-optic Fabry-Perot acoustic sensor based on PDMS diaphragm

Extrinsic Fabry-Perot Sensor for Partial Discharge Acoustic Detection in Liquid

Ultrathin Graphene Diaphragm-Based Extrinsic Fabry-Perot Interferometer for Ultra-Wideband Fiber Optic Acoustic Sensing.

Fabry-Perot Interference Fiber Acoustic Wave Sensor Based on Laser Welding All-Silica Glass

Polymer Diaphragm Based Sensitive Fiber Optic Fabry-Perot Acoustic Sensor

Preparation of Fiber-Optic Interferometer Based Infrasound Sensor

Optical Fiber Fabry–Perot Acoustic Sensors Based on Corrugated Silver Diaphragms

A Gold Diaphragm-Based Fabry-Perot Interferometer with a Fiber-Optic Collimator for Acoustic Sensing

All-Fiber Acoustic Sensor Based on Anti-Resonant Reflective Optical Waveguide