Abstract:In this paper, a novel profiling method, Laser Confocal Feedback Profilometery (LCFP), combining quasi-common-path heterodyne phase detection with laser confocal feedback technology, is proposed. A microchip Nd:YAG laser emits 1064nm laser, which passes through a pinhole and frequency shifter, and is focused onto the sample surface. The reflected light is coupled back to the microchip laser cavity and forms the frequency shifted feedback light, causing the laser intensity modulation. When the sample is scanned laterally, its surface height variation changes both the Phase and strength of the feedback light. LCFP then extracts both the amplitude and phase information out of the laser intensity modulation to determine the integral and fractional number of half laser wavelengths contained in the height variation of two points on the sample surface. LCFP can thus overcome the half-laser-wavelength limit of phase measurement in the axial direction. The high sensitivity of microchip laser to feedback light makes LCFP able to measure samples with very low reflectivity. The LCFP experimental setup is built, and it has successfully measured the height of the stages on a glass-substrate grating. The current performances of LCFP are as followed: the axial resolution is better than 2nm, the axial range about 5 mu m, and the detectable reflectivity as low as 10(-9). Due to its direct traceability to laser wavelength, LCFP can potentially be used as the metrology standard of small-scale features.

Laser Profile Converted Device

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Development of a Novel Multi-Line Laser Triangulation Scanning System Based on the Rotary Diffraction Grating

Theory and experiment study of micro/nano photothermal expansion

A Low Diffraction Laser Beam As Applied to Polymer Ablation

Photothermal Microactuator Manufactured by Excimer Laser

New beam CO2 laser

Tailoring Freeform Beam-Shaping Lenses for Edge-Emitting Lasers

Laser Confocal Feedback Profilometry

The Effects of the Expander Lens on the Output of the High Energy Nd: Glass Solid-State Laser

Optical System for Scanning Angle Amplification in Tunable Laser Based All-Solid Lidar

Microlens beam homogenizer for excimer laser processing

Binary Optics Beam Mode Transformer and Its Application in High-Power Laser Processing

Design of Transmitting Beam Expander for Different Waves

Laser Diode Beam Shaping and Homogenization with a Multimode Fiber applied to Optical Resolution Photoacoustic Microscopy based on Linear Phased Array Ultrasound Probe

Index-Tunable Structured-Light Beams from a Laser with an Intracavity Astigmatic Mode Converter

Development of Large Aperture DOE for Beam Smoothing

An approach to achieve lateral superresolution for small probe confocal measurement system and its element

Beam collimation of laser diode based on double-focus micro-lens

High-Performance Laser Beam Homogenizer Based on Double-Sided Concave Microlens

Using the Spatial Light Modulator As a Binary Optical Element: Application to Spatial Beam Shaping for High-Power Lasers.