Abstract:A dual-chamber microbial fuel cell (MFC) was fabricated and optimized for electricity generation. Titanium wire, graphite rod, and carbon cloth supported on stainless steel mesh were the best current collector, anode, and cathode electrode materials, respectively. To enhance the efficacy of the system, carbon-based materials in nano-scale (nanocarbonized materials) were prepared from pomegranate peel waste at different hydrothermal temperatures (300, 500, and 700 o C), and were used as anode coating material. The synthesized coating materials were characterized using EDX, FT-IR, Raman spectroscopy, XRD, TEM, fluorescence, UV, and XPS analyses. Data showed that nanocarbonized material prepared at 500 o C exhibited high surface area (682 m 2 /g), high pore size (122 nm), and indicated the presence of graphene oxide (GO) structure. The electrochemical behavior of MFC was monitored by cyclic voltammetry and impedance measurements. Results revealed that the anode coated with GO provided high MFC performance with a maximum voltage of around 1000 mV, and a maximum current of 0.1 mA, corresponding to a maximum power density of 12.46 W/m 2 , which is 2.85-fold higher than that of a cell with a free graphite plate as an anode. Furthermore, the large charge transfer resistance and the low diffusive resistance observed upon coating the anode demonstrated the anode is functioning as a capacitor. The reported results proposed graphene oxide prepared from pomegranate peels as a novel coating anode material prepared from waste sustaining the idea of green curricular economy

Graphite Anodes Activated by Melamine, Carbamide, ZnCl2 and H3PO4 in Microbial Fuel Cells

Chemically activated graphite enhanced oxygen reduction and power output in catalyst-free microbial fuel cells

Performance of microbial fuel cell with graphene doped bioanode

Activated nitrogen-doped ordered porous carbon as advanced anode for high-performance microbial fuel cells

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

The Performance of a Modified Anode Using a Combination of Kaolin and Graphite Nanoparticles in Microbial Fuel Cells

Graphite Fiber Brush Anodes For Increased Power Production In Air-Cathode Microbial Fuel Cells

Binder-free graphene and manganese oxide coated carbon felt anode for high-performance microbial fuel cell

Nano-Fe3O4 Coated on Carbon Monolith for Anode Enhancement in Microbial Fuel Cells

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Electrochemical Treatment of Graphite to Enhance Electron Transfer from Bacteria to Electrodes.

Performance of Two Different Types of Anodes in Membrane Electrode Assembly Microbial Fuel Cells for Power Generation from Domestic Wastewater

Enhancing Microbial Fuel Cell Performance with Free-Standing Three-Dimensional N-doped Porous Carbon Anodes

Enhanced electroactive bacteria enrichment and facilitated extracellular electron transfer in microbial fuel cells via polydopamine coated graphene aerogel anode

Phenol-degrading Anode Biofilm with High Coulombic Efficiency in Graphite Electrodes Microbial Fuel Cell.

Enhancing microbial fuel cell performance: anode modification with reduced graphene oxide and iron(III) for improved electricity generation

Ammonia Treatment of Carbon Cloth Anodes to Enhance Power Generation of Microbial Fuel Cells

A graphene/poly(3,4-ethylenedioxythiophene) hybrid as an anode for high-performance microbial fuel cells

Performance evaluation of microbial fuel cell fabricated using green nano-graphene oxide as coating anode material

Effect of Nitrogen Addition on the Performance of Microbial Fuel Cell Anodes.

Facilely Prepared Carbon Dots as Effective Anode Modifier for Enhanced Performance of Microbial Fuel Cells