Abstract:The high electronic-mobility ZnO was developed as binder with a mesoporous carbon (MC) as catalytic material to fabricate a novel ZnO-MC counter electrode through in-situ formation technique. The homogeneous MC blended paste containing the ZnO sol was first coated on the conductive substrate, and then annealed in ambient atmosphere to obtain the ZnO-MC electrode. The annealing temperature is a key factor to obtain the high-performance ZnO-MC electrode. When annealed at 300 degrees C, the in-situ formed and dispersed ZnO nanoparticles are functioned as bridges to bind the MC particles and to strengthen the adhesion of the carbon film to the substrate, providing enough conductive paths for the transportation of the electrons to participate timely in the reduction of tri-iodide (I-3(-)), and further improving the electrochemical performances of the electrode. As a result, the efficiency of the ZnO-MC electrode for use in dye-sensitized solar cells (DSCs) enhances from 2.5% to 6.37% compared with the binder-free MC electrode. Importantly, the ZnO-MC electrode exhibits higher catalytic activity for the I-3(-) reduction than the MC electrode using carboxymethyl cellulose (CMC) as binder, leading to an increase of 14.2% in the efficiency of the cell, which is mainly from the high electronic-mobility of the ZnO. Furthermore, the efficiency of the low cost ZnO-MC based DSCs reaches 90.4% of that of the Pt based ones. Noted that compared with the Pt electrode, the ZnO-MC electrode is beneficial to obtain a device with higher open-circuit voltage. (C) 2013 Elsevier Ltd. All rights reserved.

TiCl4Pretreatment and Electrodeposition Time Investigations of ZnO Photoelectrodes Preparation for Dye Sensitized Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Zinc Oxide Precursor Treatment for Improving Dye-Sensitized Solar Cell Efficiency

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

The Preparation of TiO2 Nanotube by ZnO Nanorod Template Method and Application in Dye-Sensitized Solar Cells

Preparation of high efficiency TiO_2 photoanode for dye-sensitized solar cells by electrostatic spray

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

COATING EFFECT OF TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELL

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

Preparation of Tio2 Photoelectrodes for Dye-Sensitized Solar Cell by Crm

Preparation of Tio2 Nanocrystalline Films by Electrophoretic Deposition and Their Application in Dye-Sensitized Solar Cells

In-situ solvothermal growth of Zn2SnO4 films on FTO glass towards superior dye-sensitized solar cells

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

In situ solvothermal growth of Cu2ZnSnS4 thin film for counter electrode of dye-sensitized solar cells