Abstract:Parabolic Trough Collectors (PTCs) are commonly employed in both industrial and residential settings for the purpose of harnessing solar energy. Several techniques have been implemented to improve performance, such as altering the geometry of the absorber tube, enhancing the selective coatings of the receiver envelope, and utilizing nanofluids . This study proposes a new method for enhancing the thermal-hydraulic efficiency of PTCs through the utilization of non-uniform heat flux distribution on conical solar receiver. The effectiveness of this approach is evaluated through numerical simulations conducted using Ansys Fluent with the aid of optical simulation performed using TracePro. The geometry under consideration is assessed at various diameter ratios (DR) spanning from 1.25 to 2 and Reynolds number ( Re ) ranging from 20000 to 100000, with increments of 20000. This evaluation is conducted at three distinct inlet temperatures : 150 °C, 250 °C, and 350 °C. The studied parameters include-the Nusselt number ( Nu ), friction coefficient ( f ), thermal efficiency ( ηth ), exergetic efficiency ( ηex ), and thermal enhancement factor (TEF). Furthermore, a comparative analysis is conducted between the newly proposed geometric design and a traditional straight absorber and glass structure. The findings indicated that a conical receiver generally enhances system heat transfer by a minimum of 7 % and up to 65 %, resulting in improved thermal and exergetic efficiencies. Decreasing the pipe outlet diameter from DR = 1.25 to DR = 2 led to a significant exponential rise in the friction coefficient. The TEF demonstrated that a diameter ratio of 1.25 and 1.5 resulted in maximum values of 1.19 and 1.11, respectively, at high Re and an inlet temperature of 350 °C. The results suggested that incorporating conical receivers in PTCs can greatly improve their performance. To minimize the friction coefficient and associated pumping power, it is crucial to carefully evaluate the reduction of the diameter of the absorber outlet. The results offered valuable insights for the development and improvement of PTCs in both industrial and power generation settings, promoting the adoption of renewable energy and supporting long-term sustainability.

Three-Dimensional Numerical Study on Turbulent Mixed Convection in Parabolic Trough Solar Receiver Tube

DYNAMIC HEAT TRANSFER CHARACTERISTICS OF PARABOLIC SOLAR TROUGH COLLECTORS

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

Effect of receiver diameter ratio on thermal performance of natural circulation steam generation system as applied to parabolic trough collector using water as working fluid

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection

Numerical Investigation on Uniformity of Heat Flux for Semi-Gray Surfaces Inside a Solar Cavity Receiver

Numerical investigation on heat transfer and thermoelastic stress in a solar cavity receiver

EXPERIMENTAL AND SIMULATION INVESTIGATION ON A PARABOLIC TROUGH SOLAR COLLECTOR

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

Buoyancy effects on convective heat transfer of supercritical CO2 and thermal stress in parabolic trough receivers under non-uniform solar flux distribution

Heat Transfer Enhancement in Parabolic through Solar Receiver: A Three-Dimensional Numerical Investigation

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Unveiling Impacts of Heat Flux Distribution on Forced Convection in Horizontal Evacuated Tubes

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Numerical Simulation and Experimental Study of the Tube Receiver's Performance of Solar Thermal Power Tower

Thermal-fluid-mechanical analysis of tubular solar receiver panels using supercritical CO2 as heat transfer fluid under non-uniform solar flux distribution

Improving overall heat transfer performance of parabolic trough solar receiver by helically convex absorber tube

Coupling Effect Between Heat Flux Distribution and Buoyancy of Supercritical CO2 Heat Transfer with Nonuniform Heat Flux in Parabolic-Trough Collector

A coupled optical-thermal-fluid-mechanical analysis of parabolic trough solar receivers using supercritical CO2 as heat transfer fluid

Analytical Solution of the Transient Heat Conduction in the Absorber Tube of a Parabolic Trough Solar Collector Under Quasi-Steady Conditions

Modeling of Fluid Flow and Heat Transfer in a Trough Solar Collector