Abstract:Membrane-based absorption shows numerous potential applications for CO2 capture from flue gas. However, during the process, membrane fouling is not only caused by the wetting but also induced by gaseous components (SOx, NOx, and water vapor) and fine particles in the flue gas. In this work, the synergetic effects of water vapor coupling with SOx and NOx as well as the fine particles were investigated to better understand the membrane fouling and the performance of polypropylene hollow fiber membrane modules for CO2 capture in actual industrial conditions. The CO2 removal efficiency and the mass transfer rate over time were studied under different feed gas flows of various gaseous composition schemes. The membrane performance suffered from a notable decrease after exposure to SO3 and particles, and in a wet gas stream, the effects of SO3 and particles were irreversible, whereas the influence of SO2 and NO2 can be recovered by N-2 sweeping. The characterization results of membrane modules confirm that the membranes are polluted by gaseous and particle impurities to different extents, and after long-term operation in flue gas containing impurities, the morphology of materials changed substantially. The reduction of contact angles illustrated that the hydrophobic property decreases obviously after exposure to SOx Moreover, the results of Energy dispersive spectrometry and Fourier transform infrared spectroscopy indicated that the interaction of stranded SO3 and the membrane formed a new group. During the process of membrane CO2 adsorption from flue gas containing fine particles, the pores of the membrane were blocked by fine particles and the surfaces were covered by a particle layer, which occupies the efficient contact area and leads to an increase of mass-transfer resistance and reduced membrane performance.

CO2 Capture using a Superhydrophobic Ceramic Membrane Contactor

ScienceDirect The 7 th International Conference on Applied Energy – ICAE 2015 CO 2 capture using a superhydrophobic ceramic membrane contactor

Superhydrophobic Ceramic Membrane Coupled with a Biphasic Solvent for Efficient CO2 Capture

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Membrane Gas Absorption for CO 2 Capture from Flue Gas Containing Fine Particles and Gaseous Contaminants

CO2 capture using superhydrophobic ceramic membrane: Preparation and performance analysis

Experimental studies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fiber membrane contactor

Fabrication and Characterization of Superhydrophobic Polypropylene Hollow Fiber Membranes for Carbon Dioxide Absorption

Fouling of Impurities in Desulfurized Flue Gas on Hollow Fiber Membrane Absorption for CO2 Capture

Effects of SO2 on CO2 capture using a hollow fiber membrane contactor

Hollow Fiber Membrane Separation Process in the Presence of Gaseous and Particle Impurities for Post-Combustion CO2 Capture

Fabrication of a superhydrophobic mixed matrix PVDF-SiO2-HDTMS hollow fiber membrane for membrane contact carbon dioxide absorption

Surface modification of polypropylene hollow fiber membranes using fluorosilane for CO2 absorption in a gas-liquid membrane contactor

Fabrication of a super hydrophobic polyvinylidene fluoride–hexadecyltrimethoxysilane hybrid membrane for carbon dioxide absorption in a membrane contactor

Surface modification to produce superhydrophobic hollow fiber membrane contactor to avoid membrane wetting for biogas purification under pressurized conditions

Microporous polypropylene hollow fiber membranes contactor for the separation and fixation of carbon dioxide from simulative flue gas

Precombustion Co2 Capture in Polymeric Hollow Fiber Membrane Contactors Using Ionic Liquids: Porous Membrane Versus Nonporous Composite Membrane

Co2 Capture Using Hollow Fiber Membrane Under Wet Ammonia-Based Desulfurization Flue Gas Conditions

Post-combustion CO2 capture with sweep gas in thin film composite (TFC) hollow fiber membrane (HFM) contactor

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Ultrahigh permeation of CO2 capture using composite organosilica membranes