Abstract:The feedrate scheduling has received much attention recently because it is one of the most important tasks in the CNC (computer numerical control) spline interpolator which performs better than conventional linear interpolator in both machining smoothness and efficiency. It is acknowledged that the feedrate scheduling of five-axis machine tools under axial drive constraints is extremely challenging due to the complex-coupled motion relationship between five axes and tool tip/orientation. Existing methods mainly schedule five-axis feedrate with the time-optimal purpose, i.e., planning the feedrate as high as possible provided the drive constraints are not exceeded. However, this kind of methods will result in a frequent time-varying feedrate profile, and this doubtlessly goes against with the feed-motion stability. To deal with this problem, this paper proposes an interval partition-based five-axis feedrate scheduling method with the purpose of balancing feed-motion efficiency and stability, under the constraints of axial drive parameters in terms of velocity, acceleration, and jerk. To accomplish this purpose, the integral toolpath is partitioned into non-sensitive (NS), semi-sensitive (SS), and full-sensitive (FS) intervals, according to the relation between required and limited axial feed parameters. The constant speed is scheduled in each FS interval, and the smooth variable speed is scheduled in NS and SS intervals; thus, the feed-motion stability can be ensured without too much reduction of the feed-motion efficiency. Example tests are conducted to illustrate the application of the proposed approach, and it is shown from the illustration results that the proposed method can surely balance the feed-motion efficiency and stability of the five-axis spline toolpaths, under the axial drive constraints.

Mechanics-based Feedrate Scheduling for Multi-Axis Plunge Milling

Feedrate Scheduling for Multi-Axis Plunge Milling of Open Blisks

Feedrate scheduling strategy for free-form surface machining through an integrated geometric and mechanistic model

An Intelligent Optimization Approach of Feedrate Scheduling Based on Hybrid Simulation Models

Predictive Force Model Based Variable Feedrate Scheduling for High-Efficiency NC Machining

A Force-Measuring-based Approach for Feed Rate Optimization Considering the Stochasticity of Machining Allowance

Crossing Principle-Based Feedrate Planning Method for 5-Axis CNC Milling with Drive Constraints

A New Approach of Modelling Bottom Edge Cutting in 4-Axis Rough Milling of Complex Parts and Its Application on Feed Rate Optimization

A Feedrate Scheduling in Die-Cavity Roughing Based on Cutting Force Surface Model

Feedrate Scheduling Method for Constant Peak Cutting Force in Five-Axis Flank Milling Process

An Adaptive Feedrate Scheduling Method With Multi-Constraints For Five-Axis Machine Tools

Feedrate scheduling of a five-axis hybrid robot for milling considering drive constraints

A Compound Feedrate Control Method For Multi-Axis Cnc Machining

An Effective and Automatic Approach for Parameters Optimization of Complex End Milling Process Based on Virtual Machining

The feedrate scheduling of parametric interpolator with geometry, process and drive constraints for multi-axis CNC machine tools

Feedrate optimization for variant milling process based on cutting force prediction

Interval Partition-Based Feedrate Scheduling with Axial Drive Constraints for Five-Axis Spline Toolpaths

Off-line Feedrate Optimization with Multiple Constraints for Corner Milling of a Cavity

An Optimized Feedrate Scheduling Method for CNC Machining with Round-off Error Compensation

Multi-constrained Adaptive Feedrate Control for 5-Axis Machining

A Novel Automatic Feedrate Adjustment Method for Die-Cavity Roughing