Abstract:The paper investigates the characteristics of the laser beam percussion micro-drilling (LBPMD) process in aerospace nickel-based superalloy Hastelloy X using microsecond pulses. The quality of the drilled hole is crucial in laser beam micromachining, and selecting appropriate process parameters significantly impacts the hole's quality. The objective is to achieve predefined hole dimensions with minimal taper angles. Additionally, the study focuses on the alteration of pulse width, which is a combination of laser pulse frequency and duty cycle. Laser power ( P ), duty cycle % ( D ), focal plane position ( FPP ), and laser frequency ( f ) are considered input parameters, while geometric features such as inlet and outlet diameters, hole taper angle, and inlet circularity are examined as process responses. ANOVA is employed to establish significant relationships between process parameters and response variations based on experimental tests. Creating a precise simulation model that accurately accounts for the moving boundary of the target material's receding surface is a crucial and challenging task in formulating the laser heat conduction problem. It is necessary to simultaneously capture the material's dynamic front movement and update the boundary conditions of the laser source. To model the micro-drilled hole with LBPMD, the UMESHMOTION and DFLUX subroutines, along with the arbitrary Lagrangian-Eulerian (ALE) adaptive remesh algorithm in the AbaqusTM software, are utilized. Notably, no previous numerical study has predicted the geometry of micro-drilled holes using this technique. The proposed procedure is validated through the predictions of inlet and outlet hole diameters. Special emphasis is placed on the validation of models. Consequently, the numerical model and statistical model are compared as well as the need to define model applicability. The study demonstrates that all input parameters significantly influence the inlet hole diameter, while the pulse width notably affects the taper angle and circularity. The interaction between high laser frequency and low duty cycle results in reduced pulse duration. Multi-objective optimization is performed to determine the optimal process parameter settings for desired quality characteristics, considering minimum hole taper angle, precise inlet diameter, and maximum inlet circularity of the hole as optimization criteria. The findings show that with the optimized predicted results obtained from the optimal input variables, a composite desirability of 92% can be achieved.

Modelling and optimisation of a femtosecond laser micro-machining process for micro-hole array products

Optimization of multistage femtosecond laser drilling process using machine learning coupled with molecular dynamics

Optimization of low-power femtosecond laser trepan drilling by machine learning and a high-throughput multi-objective genetic algorithm

Design of a Femtosecond Laser Percussion Drilling Process for Ni-Based Superalloys Based on Machine Learning and the Genetic Algorithm

Experimental investigation and optimization of modification during coaxial waterjet-assisted femtosecond laser drilling

Fabrication of micro holes using low power fiber laser: surface morphology, modeling and soft-computing based optimization

Optimization of the femtosecond laser trepan drilling strategy on IN792 for improving hole geometrical characteristics and machining efficiency

Optimization and Modeling of Process Parameters in Multi-Hole Simultaneous Drilling Using Taguchi Method and Fuzzy Logic Approach

A review on laser drilling optimization technique: parameters, methods, and physical-field assistance

Research on Microhole Processing Technology Based on the Femtosecond-Laser Spiral Trepanning Method

An Experimental Investigation of the Effects of Femtosecond Laser Helical Drilling: Influence of Process Parameters

Optimization of PC micro-drilling using a continuous CO2 laser: an experimental and theoretical comparative study

Economic Parameter Design for Ultra-Fast Laser Micro-Drilling Process.

Femtosecond laser processing of controlled tapered micro-holes based on dynamic control of relative attitude

Experimental Investigation and Optimization on Trepanning Drilling in K24 Superalloy by Femtosecond Laser Via Orthogonal Experiment

Tunable Simultaneous Bayesian Optimization of Hole Taper and Processing Time in QCW Laser Drilling

Hybrid modeling and optimization of fiber laser hole cutting of austenitic stainless-steel sheets using response surface

Parameter optimization of laser die-surface hardening using the particle swarm optimization technique

Molecular dynamics-guided quality improvement in the femtosecond laser percussion drilling of microholes using a two-stage pulse energy process

A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization

Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel