Abstract:Magnetic pulse welding (MPW) is widely used in the connection of dissimilar metals. The welding process involves the coupling of the electromagnetic field and structural field, which is a high-energy transient forming process. Based on the current experimental methods, it is difficult to capture the relevant data in the process of magnetic pulse welding, and the transient forming mechanism of magnetic pulse welding needs to be further studied. Taking the magnetic pulse welding of an Al-Mg sheet as an example, based on the Ansoft Maxwell and ANSYS finite element simulation platform, the loose coupling method was used to analyze an electromagnetic field generated by the discharging capacitor bank and structural field of the Al-Mg sheet under the action of electromagnetic force. The discharge period of the magnetic pulse welding capacitor bank was 62 μs. The current direction in the aluminum sheet changed once half a cycle, and the direction of the electromagnetic force was always consistent with the Z-axis. Under the skin effect, the magnetic induction intensity on the lower surface of the aluminum sheet was the largest. At 16 μs, the induced current, electromagnetic force and magnetic induction intensity in the aluminum sheet reached the peak values, which were 7.89 A/m2, 4.58 N/m3 and 12.6 T, respectively. The maximum electromagnetic force and velocity in the structural field were 2400 KN and 300 m/s. The structure field simulation reproduces the transient forming process of magnetic pulse welding, and clarifies the formation mechanism of the "intermediate zone rebound uncomposite zone-welding bonding zone-unbound zone". Based on the numerical simulation technology, the research on the transient forming mechanism of magnetic pulse welding under multiphysics simulations can promote the development and application of magnetic pulse welding technology and better guide engineering practices.

Experimental Investigation on Fabrication of Al/Fe Bi-Metal Tubes by the Magnetic Pulse Cladding Process

Temperature evolution, IMC formation, and resulting bonding efficacy in bimetallic tubular components fabricated by a novel friction stir backward extrusion cladding method

The Deformation Behavior and Microstructure Evolution of Cladding Tube during Spinning Composite Process of Mg/Al Tube

Design and processing behavior of large tubes with a rotating magnetic pole core-based magnetic abrasive finishing

Process simulation and experimental investigation on joining of Al/Ti sheets by magnetic pulse welding

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Magnetic pulse welding of metallic tubes – experimental investigation and numerical modelling

Numerical simulation and experimental study on axial compression electromagnetic bulging of aluminum alloy tube

Co-Extrusion of Dissimilar Aluminum Alloys via Shear-Assisted Processing and Extrusion

Study on magnetic pulse crimping process for joining large-diameter aluminum alloy tube/magnesium alloy shaft

Experimental study and Finite Element Modelling of Pure Copper Tube Fabrication via the Parallel Tubular Channel Angular Pressing (PTCAP) Process

Investigation on formability of ribbed tube and its forming quality by MPCD process

A novel magnetic field assisted powder arc additive manufacturing for Ti60 titanium alloy: Method, microstructure and mechanical properties

A novel forming process of Mg/Al composite square tube based on numerical simulations and experiments

Microstructure evolution, diffusion behavior, and mechanical properties of a Cu/AlCoCrFeNi 2.1 composite under pulsed magnetic field

Multiphysics Numerical Simulation of the Transient Forming Mechanism of Magnetic Pulse Welding

Fabrication of TC4 and Ti48Al bimetals by plasma arc additive manufacturing: Microstructure and mechanical properties

Multipass cold drawing of magnesium alloy minitubes for biodegradable vascular stents.

Improvement of Bonding Strength of Horizontal Twin-Roll Cast Steel/Aluminum Clad Sheet by Electromagnetic Fields

Magnetic pulse welding of aluminum to steel tubes using a field-shaper with multiple seams

Development of the manufacturing process of aluminum alloys with high strength and conductance