Abstract:Highlights • The preparation methods and difficulties of the Mg/Al bimetal were introduced. • The research progress of the interfacial regulation and strengthening of the Mg/Al bimetal was summarized. • The future development direction of the Mg/Al bimetal was prospected. • This paper will provide some new ideas for the development and application of the Mg/Al bimetal. Mg/Al bimetal combines the advantages of both aluminum and magnesium and has broad application prospects in automotive, aerospace, weapons, digital products and so on. The compound casting has the characteristics of low cost, easy to achieve metallurgical combination and suitable for the preparation of complex bimetallic parts. However, bimetallic joint strength is low due to differences of physical properties between Al and Mg, oxide film on metallic surface and interfacial Al-Mg IMCs, which is closely related to the interfacial microstructure and properties. Therefore, how to control the interface of the bimetal to achieve performance enhancement is the focus and difficulty in this field. At present, there are mainly the following strengthening methods. First, the "zincate galvanizing" and "electrolytic polishing+anodic oxidation" technology were exert on the surface of Al alloy to remove and break the oxide film, which improved the wettability between Al and Mg. Second, the undesirable Al-Mg IMCs were reduce or elimination by adding the interlayers (Zn, Ni and Ni-Cu). Thirdly, the evolution process of interfacial microstructure was changed and fine strengthening phases were formed by adding Si element to Al alloy or rare earth element to Mg alloy. Fourthly, mechanical vibration and ultrasonic vibration were applied in the process of the filling and solidification to refine and homogenize the interfacial structure. Finally, some other methods, including secondary rolling, thermal modification, heat treatment and constructing exterior 3D morphology, also can be used to regulate the interfacial microstructure and compositions. The above strengthening methods can be used alone or in combination to achieve bimetallic strengthening. Finally, the future development direction of the Mg/Al bimetal is prospected, which provides some new ideas for the development and application of the Mg/Al bimetal.

A novel forming process of Mg/Al composite square tube based on numerical simulations and experiments

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

A direct extrusion‐shear deformation composite process that significantly improved the metallurgical bonding and texture regulation grain refinement and mechanical properties of hot-extruded AZ31/AA6063 composite tubes

The Deformation Behavior and Microstructure Evolution of Cladding Tube during Spinning Composite Process of Mg/Al Tube

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

A Continuous Extrusion‐Shear (ES) Composite Process for Significantly Improving the Metallurgical Bonding and Textures Regulations and Grain Refinements of Al/Mg Bimetallic Composite Rods

Additive Manufacturing of Magnesium and its alloys: Process-Formability-Microstructure-Performance Relationship and Underlying Mechanism

Fabrication and Interface Structural Behavior of Mg/Al Thickness-Oriented Bonding Sheet via Direct Extrusion

Experimental and numerical investigation into rectangular tube extrusion of high-strength magnesium alloy

Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

Enhanced Strength–Ductility Synergy of Mg-Al-Sn-Ca Alloy via Composite Asymmetric Extrusion

Roll bonding mechanism for Mg/Al composite plate based on electron work function in the initial stage

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Influence of extrusion method on the microstructure and mechanical properties of formed magnesium alloy tubes

Fabrication of fine-grained, high strength and toughness Mg alloy by extrusion−shearing process

Integrated Physical and Numerical Simulations of Weld Seam Formation During Extrusion of Magnesium Alloy

Preparation, interfacial regulation and strengthening of Mg/Al bimetal fabricated by compound casting: A review

Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging

Continuous Extrusion Forming Technology of Magnesium Alloy Thin-Walled Tubules