Abstract:Solid-state bonding takes place during the extrusion process to produce a hollow metal profile through a porthole die, known as extrusion welding. Defective weld seams degrade extruded products in mechanical properties. The present research was aimed to determine the effect of extrusion condition on the longitudinal weld seam quality of a magnesium alloy, Mg-8Al-0.5Zn-0.5RE, using an integrated physical and numerical simulation method. A special die set-up for physical simulation was designed, through which two magnesium alloy rods were welded in the solid-state under high hydrostatic pressure. Extrusion welding experiments under different conditions were performed. It was demonstrated that, with this die set-up, the formation of weld seams during extrusion to produce hollow profiles could be physically simulated. The extrusion welding experiments were then numerically simulated to reveal strains, stresses and hydrostatic pressures that could not be experimentally measured. Finally, the tensile strength and elongation of the extrusion-welded magnesium alloy were determined and its microstructure was examined. The results showed that the bonding strength increased with decreasing extrusion speed and rising extrusion temperature. For well-bonded rods, weld seam was invisible under optical microscope. Attributed to high temperature and large equivalent strain, complete dynamic re crystallization occurred across the interface, leading to a reduced average grain size and disappearance of weld seam. By applying the integrated physical and numerical simulation method, extrusion process parameters for a particular magnesium alloy can be optimized to ensure weld seam quality of extruded hollow profiles.

Experimental and numerical investigation into rectangular tube extrusion of high-strength magnesium alloy

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Investigation into the Extrudability of a New Mg-Al-Zn-RE Alloy with Large Amounts of Alloying Elements

Research on Hot Extrusion and Cold Drawing for Micro-Tube of Magnesium Alloys

Influence of extrusion method on the microstructure and mechanical properties of formed magnesium alloy tubes

Research Progress on Microstructure Evolution and Strengthening-Toughening Mechanism of Mg Alloys by Extrusion

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Integrated Physical and Numerical Simulations of Weld Seam Formation During Extrusion of Magnesium Alloy

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy

Evolution of Microstructures, Texture, Damping and Mechanical Properties of Hot Extruded Mg-Nd-Zn-Zr Alloy

Asymmetric Extrusion Technology of Mg Alloy: A Review

Recent research and advances in extrusion forming of magnesium alloys: A review

Evolution of Microstructure and Tensile Properties of Extruded Mg-4Zn-1Y Alloy

Effect of Extrusion Parameters on Microstructure and Mechanical Properties of Mg-7.5Gd-2.5Y-3.5Zn-0.9Ca-0.4Zr (wt%) Alloy

Optimization of Microstructure and Mechanical Property of a Mg-Zn-Y-Nd Alloy by Extrusion Process

Study on microstructure and properties of thin tube of AZ31 magnesium alloy by extrusion technology

Microstructures and Mechanical Properties of a High-Strength Mg-3.5Sm-0.6Zn-0.5Zr Alloy

Microstructure and Mechanical Properties of Extruded Mg-Zn-Y Alloy

Ultrahigh Strength Mg-Al-Ca-Mn Extrusion Alloys with Various Aluminum Contents

Investigation of the microstructure and properties of extrusion-shear deformed ZC61 magnesium alloy under high strain rate deformation