Abstract:Surface integrity has a significant impact on the performance and life cycle of the blisk blade. Residual stress, as one of the important characterization parameters of surface integrity, is closely related to the performance of the aeroengine blisk blade. A certain interval of residual compressive stress can significantly inhibit the generation of microcracks. This paper proposes an optimization method of polishing process parameter interval based on sensitivity analysis. This research studied the effect of polishing parameters of the alumina ACW (abrasive cloth wheel) on the surface residual stress of the GH4169 superalloy blisk blade. Firstly, the experiment was designed by four factors and three levels response surface method, the multiple regression of the experimental data based on Minitab software was used to get a prediction model of polished surface residual stress. And an analysis of variance was performed on the model. Subsequently, the model of relative sensitivity was got based on this model. The sensitivity order of polishing surface residual stress to each polishing parameter was obtained. And the judging method of stable interval and instable interval was put forward. Then, a parameter interval optimization method was proposed, and the optimal interval of process parameters was obtained. Finally, a polishing verification experiment was performed. The results show that: for the polishing of GH4169 superalloy blades, the surface residual stress is most sensitive to the feed rate vf of the ACW, followed by the granularity p and the rotation rate ω, and the compression depth ap is the least sensitive. The optimal interval of polishing process parameters is: the rotation rate ω is [11000 r/min, 11500 r/min], the feed rate vf is [100 mm/min, 200 mm/min], the compression depth ap is [0.6 mm, 1.0 mm], and the granularity p is [400 #, 600 #]. The optimized polishing process parameters can obtain a large and stable surface residual compressive stress, which is helpful to increase fatigue strength of the blisk blade.

Constant-load adaptive belt polishing of the weak-rigidity blisk blade

Research on Flexible Adaptive CNC Polishing Process and Residual Stress of Blisk Blade

Machining behavior and experimental investigation of ultrasonic vibration assisted belt flapwheel flexible polishing

Research on Formation Mechanism and Optimization Method of Surface Waviness of TC4 Blisk Blade

Sensitivity analysis and parameter interval optimization for residual stress in polishing process of GH4169 blisk blade

A Dynamical Tool Adjustment Method For Computer Numerical Control Abrasive Belt Grinding

Improving profile accuracy and surface quality of blisk by electrochemical machining with a micro inter-electrode gap

Prediction of contact characteristics of abrasive belt compliant grinding for aircraft blades

Laser-Based Thickness Control In A Double-Side Polishing System For Silicon Wafers

Active Control of Surface Integrity in Thin Film Scratching and Finishing

Modeling bulk modulus of abrasive cloth wheel and polished surface roughness for polishing blade with abrasive cloth wheel

A self-adaptive auxiliary fixture for deformation control in blade machining

A new in-processes active control method for reducing the residual stresses induced deformation of thin-walled parts

Modeling and Parameter Optimization of Flexible NC Polishing Vibration of Abrasive Cloth Wheel Based on Sensitivity Analysis

On the path planning method of polishing tool based on the abrasive belt flap wheel

Predictive dynamic modeling and analysis of blisks through digital representations constructed upon precise geometry measurements

A review of surface quality control technology for robotic abrasive belt grinding of aero-engine blades

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

Control of mistuning level using hard coating for blisks based on mistuning identification technique

A Path Planning Method for Polishing Thermal Barrier Coatings on the Surface of Aero-Engine Blades Based on Point Cloud Slicing

Research on flexible base discrete adhesion model of SCAPW for blade machining