Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Research on flexible base discrete adhesion model of SCAPW for blade machining

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Quantitative finite element analysis of microscopic surface formation for TC4 aeroengine blade polishing using single-grain method

Prediction of contact characteristics of abrasive belt compliant grinding for aircraft blades

A model for material removal of robot-assisted blade polishing using abrasive cloth wheel

Mechanism of Mid-Spatial-frequency Waviness Removal by Viscoelastic Polishing Tool

Research on Flexible Adaptive CNC Polishing Process and Residual Stress of Blisk Blade

A high-precision prediction model of surface roughness in abrasive belt flexible grinding of aero-engine blade

Compliant Polishing of Thin-Walled Freeform Workpiece

Machining behavior and experimental investigation of ultrasonic vibration assisted belt flapwheel flexible polishing

Research on Formation Mechanism and Optimization Method of Surface Waviness of TC4 Blisk Blade

Analysis of machining deformation for adaptive CNC machining technology of near-net-shaped jet engine blade

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling

Position-dependent milling process monitoring and surface roughness prediction for complex thin-walled blade component

Modeling bulk modulus of abrasive cloth wheel and polished surface roughness for polishing blade with abrasive cloth wheel

A Model for Mechanical Wear and Abrasive Particle Adhesion during the Chemical Mechanical Polishing Process

Research on modeling of flexible polishing force of abrasive cloth flap wheel based on elastic–plastic deformation characteristics

Accurate modeling of material removal depth in convolutional process grinding for complex surfaces

A Contact-Mechanics-Based Model For General Rough Pads In Chemical Mechanical Polishing Processes

Process Parameter Modeling and Optimization of Abrasive Water Jet Dressing Fixed-Abrasive Pad Based on Box–Behnken Design

Modeling and Parameter Optimization of Flexible NC Polishing Vibration of Abrasive Cloth Wheel Based on Sensitivity Analysis