Abstract:<p>It is usually deformed severely for thin-walled workpiece when the fixture is removed after machining, which is mainly caused by the redistribution of internal stress and machining induced residual stress (MIRS). Previous works have tried to relax the fixture in-processes to release the residual stresses (i.e. internal stress and MIRS), and perform the following machining operation after re-fasten the workpiece at its totally relaxed state. However, the totally relaxed state is only an equilibrium of residual stresses and the MIRS on the top layer of the workpiece will be changed after the following machining process. The residual stresses of the workpiece become imbalance again and thus will lead to the deformation of final component. In this paper, a novel research work of actively controlling the in-processes deformation of thin-walled part is presented, which is aimed at balancing the internal stress/MIRS and preventing the redistribution of residual stresses after last machining step. Firstly, the variations of internal stress, MIRS and clamping force during machining are analyzed through a simplified in-process model of blade. An equilibrium equation is established by taking the residual stresses as the equivalent loads of clamping point. Next, to achieve the proposed in-processes active control method, a mathematical model of how to actively adjust the fixture between machining operations is established. And then, the finite element method (FEM) is used to calculate the MIRS induced deformation, in which the MIRS is measured through experiment. A prototype of active control fixture for blade part is developed to adjust the in-process deformation. Finally, three groups of machining experiments on a simplified blade with three different treatments on the fixture after the rough machining – no relaxing the fixture at all, totally relaxing the fixture in-process, and actively controlling the deformation in-process– are carried out. The validation demonstrates that the proposed in-process active control method could decrease machining deformation significantly. The maximum deformation reduced to 18.3 % and 42.9 % compare to the no relaxing and totally relaxing the fixture after rough milling.</p>

A self-adaptive auxiliary fixture for deformation control in blade machining

Machining Fixture for Adaptive CNC Machining Process of Near-Net-shaped Jet Engine Blade

Deformation control of thin-walled parts based on the reverse segment method

Application of low-melting alloy in the fixture for machining aeronautical thin-walled component

Investigation of Moving Fixture on Deformation Suppression During Milling Process of Thin-Walled Structures

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Analysis and optimization of the machining fixture system stiffness for near-net-shaped aero-engine blade

Modeling and Performance Analysis of Machining Fixture for Near-Net-shaped Jet Engine Blade

Alternative flexible correction forming of a blade: multipoint correction with surface measurement and deformation simulation

Machining fixture and deformation control of aero-engine thin-walled casing

Tool path modification based on deformation mapping relationship for the adaptive machining of aero-engine blade

A new in-processes active control method for reducing the residual stresses induced deformation of thin-walled parts

Research on adaptive CNC machining arithmetic and process for near-net-shaped jet engine blade

Research on shape and position control during the forming of the different hollow blades with low melting point alloy mandrel

A Deformation Control Method in Thin-Walled Parts Machining Based on Force and Stiffness Matching Via Cutter Orientation Optimization

An adaptive clamp system for deformation control of aerospace thin-walled parts

Integrated Analysis Method of Thin-Walled Turbine Blade Precise Machining

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

Analysis of machining deformation for adaptive CNC machining technology of near-net-shaped jet engine blade

Aero-Engine Blade Cryogenic Cooling Milling Deformation Simulation and Process Parameter Optimization