Abstract:A novel and economical microwave route has been developed for the synthesis of electrochemically active LiV(3)O(8) material by using a domestic microwave oven. The heating behavior of the designed reaction system guided the preparation of LiV(3)O(8) at a suitable irradiation power (i.e. heating rate), reaction time, and temperature. At the lowest irradiation power, the conversion fraction of reactants was mainly controlled by reaction temperature. Characterization results of X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopy, scanning (SEM) and transmission (TEM) electron microscopy, and BET surface areas indicated that the phases of samples prepared by microwave and traditional methods were in good agreement. Nevertheless, the crystallinity, crystallite configuration, and morphology of the samples were different, and were affected by the irradiation time and power. A floppy superposition structure of nanosheets (the size of one nanosheet was about 4.5 microm x 1.2 microm x 3 nm) was preferentially grown at the lowest irradiation power, and this effect on structure was more in evidence as the nanorods formed at the highest irradiation power. Electrochemical studies on ionic conductivity, electrochemical impedance spectroscopy (EIS), and charge-discharge capacity were carried out. It was found that the conductivity, first discharge capacity, and cycle performances of the samples were affected by the crystal size, crystallinity, and crystal configuration and defection concentration. The sample L30 prepared at the lowest irradiation power and the shortest time (30 min) showed the highest discharge capacity (335 mAh/g), but its discharge capacity decreased rapidly. By comparison, the sample L100 had a floppy superposition structure of nanosheets and a high surface area, provided a good two-dimensional channel for the transition of Li(+) ions, and was stable during the intercalation/deintercalation process of Li(+) ions, therefore the high ionic conductivity, high discharge capacity, and good cycle performance were presented. The relationship between the electrochemical properties and the irradiation power was discussed.

ChemInform Abstract: Synthesis and Electrochemical Performance of Sn‐Doped Li3V2(PO4)3/C Cathode Material for Lithium Ion Battery by Microwave Solid‐State Technique.

Synthesis and electrochemical performance of Sn-doped Li 3V 2(PO 4) 3/C cathode material for lithium ion battery by microwave solid-state technique

Electrochemical properties of Sn-doped Li 3 V 2 (PO 4 ) 3 cathode material synthesized via a citric acid assisted sol–gel method

Preparation and Characterization of Li3v2(Po4)(3) Via Microwave Carbothermal Reduction Method

ChemInform Abstract: Freeze‐Drying Synthesis of Li3V2(PO4)3/C Cathode Material for Lithium‐Ion Batteries.

Microwave Solid-State Synthesis of LiV(3)O(8) As Cathode Material for Lithium Batteries.

The Synthesis of LiMn x Fe 1-x PO₄/C Cathode Material through Solvothermal Jointed with Solid-State Reaction.

Synthesis and Electrochemical Performance of 0.6li3v2(po4)3·0.4li–v–o Composite Cathode Material for Lithium Ion Batteries

Electrochemical Performance of Li3V2-xMnx(PO4)(3)/C Cathode Materials Prepared by a Sol-Gel Method

Aluminothermal Synthesis and Characterization of Li3V2−xAlx(PO4)3 Cathode Materials for Lithium Ion Batteries

Synthesis and Characterization of Sn-Doped Limn2o4 Cathode Materials for Rechargeable Li-Ion Batteries

Synthesis and electrochemical properties of Zn-doped, carbon coated lithium vanadium phosphate cathode materials for lithium-ion batteries

ChemInform Abstract: Polymer‐Assisted Synthesis of LiNi2/3Mn1/3O2 Cathode Material with Enhanced Electrochemical Performance.

The Synthesis of LiMnxFe1−xPO4/C Cathode Material through Solvothermal Jointed with Solid-State Reaction

Synthesis and characterization of Li3V(2−2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteries

Preparation and Characterization of Spherical Li3v2 (po4)(3)/c Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Characterization of 5 Vlini1/2mn3/2o4 Cathode Materials by Low-Heating Solid-State Reaction

Sn-doped Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials for lithium-ion batteries with enhanced electrochemical performance

Structure and Performance of Dual-doped LiMn2O4 Cathode Materials Prepared Via Microwave Synthesis Method

LiMnPO4·Li3V2(PO4)3 Composite Cathode Material Derived from Mn(VO3)2 Nanosheet Precursor

Improving Li3V2(PO4)3 cathode performance by Mn2+ doping for high-rate aqueous zinc ion hybrid batteries