Abstract:The spinel LiMn2O4 cathode is considered a promising cathode material for lithium ion batteries. Unfortunately, the poor capacity stability, especially at elevated temperature, hinders its practical utilization. In this study, the atomic layer deposition (ALD) technique is employed to deposit a TiO2 nanocoating on a LiMn2O4 electrode. To maintain electrical conductivity, this amorphous coating layer with high uniformity, conformity, and completeness is directly coated on cathode electrodes instead of LiMn2O4 particles. Among all the samples studied, the TiO2-coated sample with 15 ALD cycles exhibits the best cyclability at both room temperature of 25 degrees C and elevated temperature of 55 degrees C and has the higher specific capacity of 136.4 mAh g 1 at 0.1 C that is nearly close to the theoretical capacity of LiMn2O4. Meanwhile, this sample realizes lower polarization and less self-discharge. The improved electrochemical performance is ascribed to the high conformal and ultrathin TiO2 coating, which enhances the kinetics of Li+ diffusion and stabilizes the electrode/electrolyte interface. Also, the deconvolution of Ti 2p X-ray photoelectron spectroscopy shows a weaker peak of Ti-O-F after cycling, which indicates that the coexistence of TiO2 and TiOxFy layers can inhibit Mn dissolution and electrolyte decomposition.

Carbon Coated Li 4 Ti 5 O 12 Nanowire with High Electrochemical Performance under Elevated Temperature

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Nano-TiO 2 (B) coated LiMn 2 O 4 as cathode materials for lithium-ion batteries at elevated temperatures

Carbon-coated single-crystalline LiMn 2 O 4 nanowires synthesized by high-temperature solid-state reaction with high capacity for Li-ion battery

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

General Synthesis of Carbon-Coated Nanostructure Li4Ti5O12as a High Rate Electrode Material for Li-ion Intercalation

A facile strategy to prepare nano-crystalline Li4Ti 5O12/C anode material via polyvinyl alcohol as carbon source for high-rate rechargeable Li-ion batteries

Enhancing Electrochemical Performance of LiMn2O4 Cathode Material at Elevated Temperature by Uniform Nanosized TiO2 Coating

Significant Improvement on Electrochemical Performance of LiMn2O4 at Elevated Temperature by Atomic Layer Deposition of TiO2 Nanocoating

The Elevated Temperature Performance of LiMn2O4 Coated with Li4Ti5O12 for Lithium Ion Battery

Electrochemical Lithium Storage of Li–Ti–O Compound Calcined at Different Temperatures

Effect of High-Temperature Crystallization on the Electrochemical Properties of LiNi0.5Co0.2Mn0.3O2 Synthesized from a Lithiated Transition Metal Oxide Precursor

Highly Crystalline Lithium Titanium Oxide Sheets Coated with Nitrogen-Doped Carbon Enable High-Rate Lithium-Ion Batteries.

Facile Preparation of Nanocrystalline Li4Ti5O12 and Its High Electrochemical Performance As Anode Material for Lithium-Ion Batteries

Enhanced Elevated-Temperature Performance of Al-Doped Single-Crystalline LiMn2O4 Nanotubes As Cathodes for Lithium Ion Batteries

Electrospun Li3.9Cr0.3Ti4.8O12 Nanofibers As Anode Material for High-Rate and Low-Temperature Lithium-Ion Batteries

Nano/micrometer porous conductive network structure Li 4 Ti 5 O 12 @C/CNT microspheres with enhanced sodium-storage capability as an anode material.

Carbon-decorated Single-Crystalline Ni2P Nanotubes Derived from Ni Nanowire Templates: a High-Performance Material for Li-ion Batteries.

Carbon-Coated Li4ti5o12 As A High Rate Electrode Material for Li-Ion Intercalation

New Approach to Create TiO2(B)/Carbon Core/Shell Nanotubes: Ideal Structure for Enhanced Lithium Ion Storage

Synthesis and Electrochemical Performance of Nano-Sized Li4Ti5O12 with Double Surface Modification of Ti(III) and Carbon