Abstract:Abstract Li 3 PS 4 shows great potential as solid electrolyte for all‐solid‐state lithium batteries (ASSLBs) due to its high Li‐ion conductivity and excellent mechanical properties. However, its poor interfacial stability with bare high‐nickel active materials in the cathode mixture inhibits the energy density and electrochemical performances of the corresponding LiNi 0.6 Mn 0.2 Co 0.2 O 2 /Li 3 PS 4 /Li−In battery. The Li 3 InCl 6 electrolyte with good electrochemical/chemical stability with bare LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NCM622), which acts both as a Li‐ion additive in the cathode mixture and as an isolation layer to isolate the direct contact between the sulfide electrolytes and active materials, providing superior solid/solid interface stabilities in the assembled battery. XPS and TEM results confirm that this strategy can mitigate the side reactions between the bare NCM622 and Li 3 PS 4 electrolytes. In‐situ EIS and DRT results prove that this grading utilization of different solid electrolytes can greatly alleviate the poor electrochemical stability between those two materials, yielding smaller interfacial resistances. The corresponding battery delivers high discharge capacities at various C‐rates under different operating temperatures. It delivers a much higher initial discharge capacity of 187.7 mAh g −1 (vs. 92.5 mAh g −1 ) at 0.1 C with a coulombic efficiency of 87.6% (vs. 71.1%) at room temperature. Moreover, this battery can even show highly reversible capacity with excellent cyclability when the operating temperature lowers to 0 and −20 °C. This work provides a hierarchical utilization strategy to fabricate sulfide electrolytes‐based ASSLBs with high energy density and superior cycling performance combined with highly‐oxidation cathode materials.

Electrochemical performances of (LiMn 0.6 Fe 0.4 PO 4 /C)//LiV 3 O 8 in different aqueous solution electrolyte

Facile Synthesis of Α-Fe2o3/nb2o5 Heterostructure for Advanced Li-Ion Batteries

Electrochemical performance of high specific capacity of lithium-ion cell LiV3O8//LiMn2O4 with LiNO3 aqueous solution electrolyte

Excellent rate capabilities of (LiFePO4/C)//LiV 3O8 in an optimized aqueous solution electrolyte

Electrochemical Behaviors Of Limn1-Xfexpo4/C Cathode Materials In An Aqueous Electrolyte With/Without Dissolved Oxygen

Characteristics and Electrochemical Performance of LiFe0.5Mn0.5PO4/C Used As Cathode for Aqueous Rechargeable Lithium Battery

Aqueous rechargeable lithium battery (ARLB) based on LiV3O8 and LiMn2O4 with good cycling performance

EXCELLENT ELECTROCHEMICAL BEHAVIOR OF <font>LiMn</font><sub>2</sub><font>O</font><sub>4</sub> IN AQUEOUS ELECTROLYTE

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

An aqueous rechargeable lithium battery based on LiV 3 O 8 and Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2

Superior electrochemical performance of a novel LiFePO<sub>4</sub>/C/CNTs composite for aqueous rechargeable lithium-ion batteries

Excellent electrochemical behavior of LiMn2O4 in aqueous electrolyte

Electrochemical Performance and Stability of LiMn0.6Fe0.4PO4/C Composite

An Aqueous Rechargeable Lithium Battery of Excellent Rate Capability Based on A Nanocomposite of Moo3 Coated with Ppy and Limn2o4

Electrochemical Performance and in Situ Phase Transition Analysis of Iron-Doped Lithium Manganese Phosphate

Research Progress in Manganese-Bearing Materials for Li-ion Battery Using Aqueous Solution

Tailoring Electrolyte Distributions to Enable High-performance Li3PS4-based All-solid-state Batteries under Different Operating Temperatures

Novel High-Rate Performance of Dual Carbon-Coated Li3V2(PO4)3 Materials Used in an Aqueous Electrolyte

Tailoring Electrolyte Distributions to Enable High‐performance Li <sub>3</sub> PS <sub>4</sub> ‐based All‐solid‐state Batteries under Different Operating Temperatures

Nanostructured LiTi2(PO4)3 Anode with Superior Lithium and Sodium Storage Capability Aqueous Electrolytes

High-voltage all-solid-state lithium batteries with Li<sub>3</sub>InCl<sub>6</sub> electrolyte and LiNbO<sub>3</sub> coated lithium-rich manganese oxide cathode