Abstract:Olivine-type LiMPO4 (M = Fe, Mn, Co, Ni) has become of great interest as cathodes for next-generation high-power lithium-ion batteries. LiMnPO4, possessing a moderate working voltage compatible to the present electrolyte systems, can provide a higher energy density than LiFePO4 on account of its higher redox potential of Mn3+/Mn2+ (4.1 V) than Fe3+/Fe2+ (3.5 V). However, the electrochemical performance of LiMnPO4 is poor due to the slow lithium diffusion kinetics within the grains and the low intrinsic electronic conductivity, even much worse than those of LiFePO4. Up to now, low electronic conductivity can be successfully overcome by modifying the LiMnPO4 particles with carbon and minimizing particle size. The mesoporous and hollow sphere structure can further improve the electrochemical performance of olivine-type LiMnPO4 material. Here, we synthesized the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite by a solvothermal method using spherical Li3PO4 as the precursor. The small crystalline size of (~50 nm) LiMn0.8Fe0.2PO4 can reduce the diffusion length for lithium ion transport leading to the enhanced rate capability. The mesoporous and hollow sphere structure offers high surface area, which can enhance the electrochemical performance of LiMn0.8Fe0.2PO4/C composite as show in Figure 1. The material exhibits an ultra-long cycle life exceeding 1000 cycles with an extremely low capacity decay of 0.0068 mAh·g-1 loss per cycle, which is the best cycling performance to our knowledge. The results exhibit that the mesoporous hollow sphere LiMn0.8Fe0.2PO4/C composite is a promising cathode material for lithium ion batteries. Figure 1

Characteristics and Electrochemical Performance of LiFe0.5Mn0.5PO4/C Used As Cathode for Aqueous Rechargeable Lithium Battery

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Electrochemical Behavior Of Lifepo4/C Cathode Material For Rechargeable Lithium Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

High capacity Li1.1Mn2O3.95F0.05 cathode materials for Li-ion rechargeable battery

Electrochemical Behaviors Of Limn1-Xfexpo4/C Cathode Materials In An Aqueous Electrolyte With/Without Dissolved Oxygen

High Performance Iron-Doped LiMnPO4 Cathode Material for Lithium-Ion Batteries

Synthesis of Cathode Material LiFePO4 for Rechargeable Lithium-Ion Battery by Co-Precipitation Method

A surfactant-assisted synthesis route for scalable preparation of high performance of LiFe 0.15 Mn 0.85 PO 4 /C cathode using bimetallic precursor

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

Preparation of Carbon-Coated LiFe0.2Mn0.8PO4 Cathode Material and Its Application in a Novel Battery with Li4Ti5O12 Anode

Spinel LiNixMn2-xO4 as cathode material for aqueous rechargeable lithium batteries

Nano-/Microhierarchical-Structured LiMn0.85Fe0.15PO4 Cathode Material for Advanced Lithium Ion Battery.

Synthesis, characterization and properties of LiFePO4/C cathode material

Mn-doped LiFePO 4 @C as a high-performance cathode material for lithium-ion batteries

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Y3+ doping and electrochemical properties of LiFe0.5Mn0.5PO4@C cathode material for lithium-ion batteries

Synthesis mechanism and characterization of LiMn0.5Fe0.5PO4/C composite cathode material for lithium-ion batteries