Abstract:An aqueous rechargeable lithium-ion battery (ARLB) system has been assembled using as-prepared polypyrrole (PPy) to coat Na0.8K0.2K6O15 (NKVO) anode coupled with LiMn2O4 cathode, both immersed in an aqueous LiNO3 solution. The chemical polymerization techniques have been employed to uniformly coat the surface of NKVO with PPy. The phase of NKVO@PPy composite has been characterized by X-ray diffraction; for quantifying PPy content, the thermal gravimetric analysis was performed. Spectroscopy techniques have been used to visualize the microscale morphological changes on the particle surface of NKVO caused by PPy coating. The staircase cyclic voltammetry and galvanic charge-discharge tests have been conducted at various current rates in the voltage range of -1 to 1 V vs. saturated calomel electrode (SCE). The PPy coated NKVO material showed a similar intercalation/deintercalation mechanism to that of pristine NKVO. When subjected to cyclic performance evaluation at a higher rate of 4 A g(-1), PPy-coated NKVO@PPy exhibited a preliminary discharge capacity of 115 mA h g(-1) and 64.5 mA h g(-1) following 400 cycles of charge-discharge with a retention rate of 55.6%, whereas the uncoated NKVO showed only 18.8% capacity retention rate. The significantly improved cyclic capacity retention has been attributed to the PPy coating, which acted as a protective layer preventing the unwanted side reactions, buffering the volume change and simultaneously increasing the electrical conductivity of pristine NKVO electrode during charge-discharge cycles. The decent performance demonstrated that NKVO@PPy is a promising electrode material for ARLB.

An Aqueous Rechargeable Lithium Battery of Excellent Rate Capability Based on A Nanocomposite of Moo3 Coated with Ppy and Limn2o4

Superlattice Formation of Crystal Water in Layered Double Hydroxides for Long‐Term and Fast Operation of Aqueous Rechargeable Batteries

A high-capacity dual core-shell structured MWCNTs@S@PPy nanocomposite anode for advanced aqueous rechargeable lithium batteries.

Advanced Aqueous Rechargeable Lithium Battery Using Nanoparticulate LiTi 2 (PO 4 ) 3 /C As a Superior Anode

An Aqueous Rechargeable Lithium Battery Using Coated Li Metal as Anode

Excellent rate capabilities of (LiFePO4/C)//LiV 3O8 in an optimized aqueous solution electrolyte

Long-Lived Aqueous Rechargeable Lithium Batteries Using Mesoporous Liti2(Po4)(3)@C Anode

Aqueous rechargeable lithium battery (ARLB) based on LiV3O8 and LiMn2O4 with good cycling performance

An Aqueous Rechargeable Lithium Battery Based on Doping and Intercalation Mechanisms

A hybrid composite of H2V3O8 and graphene for aqueous lithium-ion batteries with enhanced electrochemical performance

Superior electrochemical performance of a novel LiFePO<sub>4</sub>/C/CNTs composite for aqueous rechargeable lithium-ion batteries

A hybrid of V2O5 nanowires and MWCNTs coated with polypyrrole as an anode material for aqueous rechargeable lithium batteries with excellent cycling performance

Macroporous LiFePO4 as a cathode for an aqueous rechargeable lithium battery of high energy density

An aqueous rechargeable lithium battery based on LiV 3 O 8 and Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2

Superior Cycling Performance Of A Novel Nkvo@Polypyrrole Composite Anode For Aqueous Rechargeable Lithium-Ion Batteries

Aqueous Rechargeable Lithium Batteries Using Nav6o15 Nanoflakes As High Performance Anodes

Novel High-Rate Performance of Dual Carbon-Coated Li3V2(PO4)3 Materials Used in an Aqueous Electrolyte

Superior Lithium-Ion Insertion/Extraction Properties Of A Novel Lifepo4/C/Graphene Material Used As A Cathode In Aqueous Solution

A High‐Performance Lithium Metal Battery with Ion‐Selective Nanofluidic Transport in a Conjugated Microporous Polymer Protective Layer

Aqueous Rechargeable Battery Based on Zinc and a Composite of LiNi1/3Co1/3Mn1/3O2

A Fully Aqueous Hybrid Electrolyte Rechargeable Battery with High Voltage and High Energy Density