Abstract:The aim of the present work was to identify the conditions for the preparation of stable zirconia slurries with high solids content for the production of aqueous gel tape casting objects with improved properties. Influences of the powder and dispersant on the rheological properties were investigated. High stable low-viscosity nanoparticles zirconia suspensions were achieved. Nanometer-sized tetragonal polycrystal zirconia powder was synthesized by a new low-temperature environment-benign method. The oxide powders were confirmed to be 3Y-TZP single phase with tetragonal structure measured by X-ray diffraction analysis. Acryl amide (AM) and N,N′-methylene bisacrylamide (MBAM) have been used as organic monomer and cross-linker of the process, respectively. NH4PAA (M=5000–8000) has been used as polyelectrolyte dispersant. The electrokinetic behavior of nanometer-sized zirconia suspensions stabilized by various dispersant contents was studied. The result indicated the dispersant concentration greatly affected the surface charge of nanometer tetragonal zirconia powder. The isoelectric point (IEP) obviously changed from 8.1 to about 4.7 because of the addition of polyelectrolyte dispersant. To acquire stable low-viscosity slurries, the influences of several parameters on rheological behavior of nanosized tetragonal zirconia suspensions were investigated. It was found that for each factor, there exists an optimum range in which low viscosity was achieved for a slurry with high solid loading. For the slurry of 77 wt.% powder concentration with about 1.0 wt.% polyelectrolyte (based on the powder), the viscosity was 350 mPa s at the shear rate of 110 s−1. The slurry at the optimum conditions met the demands of aqueous gel tape casting process.

Dispersion And Gelcasting Of Zirconium Diboride Through Aqueous Route

Aqueous Gelcasting and Pressureless Sintering of Zirconium Diboride Ceramics

Preparation of Ultrafine Zirconia Suspension for Gelcasting

Dispersion And Rheology Of Aqueous Zirconium Diboride Nanosuspensions

Preparation and properties of zrb 2-sic composites by centrifugal gel casting process

Rheological Properties and Gelcasting Behavior of Ultrafine Zro2 Suspension

Preparation and characterization of stable ZrB2-based ultra-high temperature ceramics slurry by aqueous gelcasting

Preparation and Characterization of Stable ZrB<sub>2</sub>-Based Ultra-High Temperature Ceramics Slurry by Aqueous Gelcasting

Rheological properties of nanometer tetragonal polycrystal zirconia slurries for aqueous gel tape casting process

Aqueous Gelcasting of ZrB2–SiC Ultra High Temperature Ceramics

Influence of Polyelectrolyte Dispersant on Slip Preparation of Nano-Sized Tetragonal Polycrystals Zirconia for Aqueous-Gel-tape-casting Process

Gel-casting Preparation of Ceramic ZrO2 Composition Microspheres

Gelcasting of ultrafine ZrO2 at room temperature

Gelcasting of Concentrated Aqueous Silicon Carbide Suspension

Preparation of High Concentrated Suspension and Gelcasting Process for Silicon Nitride Bonded Silicon Carbide Refractories

Water based gelcasting of lead zirconate titanate

Preparation of YAG Gel Coated ZrB2–SiC Composite Prepared by Gelcasting and Pressureless Sintering

An investigation on the properties of ZrO2 suspensions

Gelcasting of PZT

Microstructure and mechanical properties of ZrB2-SiC composites fabricated by the centrifugal gel casting

Dispersion behavior of zirconia nanocrystals and their surface functionalization with vinyl group-containing ligands.