Abstract:In order to cope with the storage wall of the von Neumann computing architecture, the computing in-memory (CIM) architecture embeds logic in the memory, and completes the operation while reading the data, so that the storage unit has computing power and reduces processing data transfer between the device and the memory. In order to realize the design of large-capacity and low-cost memory, this paper proposes a storage system based on 4T SRAM (static random access memory) with double word line and double threshold, which can not only realize data storage and reading, but also realize BCAM (binary content addressable memory) operations and logic operations such as AND, NOR, and XOR. During logic operation, two rows of storage data are selected through the decoding circuit, the bit lines are all pre-discharged to a low level, and the bit line voltage is compared with the reference voltage through the bit line end sensitive amplifier and the operation result is output. During BCAM operation, the external input data are decoded by the decoding circuit to realize the on and off control of the left and right transmission tubes of the storage unit, and the bit line end sensitive amplifier outputs the matching result through the NOR gate. The proposed circuit is built and simulated under 65 nm CMOS technology. Compared with the 6T memory cell, the storage area of the 4T memory cell is reduced by 25%. Compared with the single word line 4T memory structure, the double word line 4T memory structure can save about 47% of the read power consumption in very large scale integration (VLSI) applications. The maximum power consumption of data matching during BCAM operation is 909.72 FJ, and the array operation speed of N columns can reach 16161.6×N MB/Hz when the word line voltage is 600 mV.

Two-terminal Vertical Memory Cell for Cross-Point Static Random Access Memory Applications

Carbon-Based Three-Dimensional SRAM Cell with Minimum Inter-Layer Area Skew Considering Process Imperfections

Two-Direction In-Memory Computing Based on 10T SRAM With Horizontal and Vertical Decoupled Read Ports

Computing In-Memory Design Based on Double Word Line and Double Threshold 4T SRAM

Novel Silicon-Based Flash Cell Structures for Low Power and High Density Memory Applications

Ultraflexible Monolithic Three-Dimensional Static Random Access Memory.

HfOx based vertical resistive random access memory for cost-effective 3D cross-point architecture without cell selector

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

HfOx-based vertical resistive switching random access memory suitable for bit-cost-effective three-dimensional cross-point architecture.

All-Oxide-Semiconductor-Based Thin-Film Complementary Static Random Access Memory

Design of Two-Terminal PNPN Diode for High-Density and High-Speed Memory Applications

Compact 3-D-SRAM Memory with Concurrent Row and Column Data Access Capability Using Sequential Monolithic 3-D Integration.

SRAM cell with asymmetric pass-gate nMOSFETs for embedded memory applications

All WSe2 1T1R resistive RAM cell for future monolithic 3D embedded memory integration

3T2M Canted-Type X SOT-MRAM: Field-free, High-Energy-efficiency, and High-Read-margin Memory Toward Cache Applications

A Low Power 4T2C Nvsram with Dynamic Current Compensation Operation Scheme

2D Materials-Based Static Random-Access Memory

In-Memory Computing with Double Word Lines and Three Read Ports for Four Operands.

A 2T P-Channel Logic Flash Cell for Reconfigurable Interconnection in Chiplet-Based Computing-In-Memory Accelerators

Robust Monolithic 3D Carbon-Based Computing-in-SRAM with Variation-Aware Bit-Wise Data-Mapping for High-Performance and Integration Density

Area-Efficient 1T-2D-2MTJ SOT-MRAM Cell for High Read Performance