Abstract:High strain rate forming (HSRF) is promising to break through the conventional forming limit of materials and thus to form hard-to-deform components. During HSRF process, long-lasting micro-defects before fracture, i.e. adiabatic shear bands (ASBs) in compression and voids in tension, are significant characteristics existing in a large strain range. These defects bring about the non-destructive softening of stress and continuous exertion of ductility, in return, the stress responses affect the evolution of micro-defects. However, the interaction between stress responses and defects evolution has not yet been reflected in the existing models, resulting in a limited prediction accuracy. Aiming at this issue, the competition between hardening caused by thermal activated dislocation movements and the flow softening brought by micro-defects evolution was well modeled in this work. During the modeling, the relation between the normal strain and effect zone of ASBs was established via the modification of Bai-Dodd model by considering the geometric features of ASBs. Moreover, by introducing a rate-dependent ASB trace angle, the half width of ASBs was expressed as a function of maximum shear strain and critical instability strain. The effect of strain and strain rate to the evolution of voids under tensile conditions was taken into account by combining Hollomon hardening law with Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. Then, the interactions between micro-defects and structure related athermal stress were characterized by connecting volume fraction of voids and effective bearing area in tension and the intensity of flow localization with ASBs width in compression. As a consequence, a unified model of constitutive behaviors coupled with micro-defects evolution was established with considering rate-dependent hardening and softening. Applied to aluminum alloys, this model piedicts the stress responses, evolution of ASBs and voids, and low or negative strain rate sensitivity with high precision in large ranges of strain (0-0.6) and strain rate (0.001-5000 s(-1)). The proposed model is thus believed to be with a successful application in precise prediction and optimization of HSRF processes. (C) 2016 Elsevier Ltd. All rights reserved.

A Mixed Hardening Model of Ultrafine-grained Materials and Numerical Simulation

Theoretical Insight of Strengthening and Hardening Behavior in Ultrafine-Grained Metals under High Pressure

Constitutive modeling of mechanical behaviors in gradient nanostructured alloys with hierarchical dual-phased microstructures

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

A modified kinematic hardening model considering hetero-deformation induced hardening for bimodal structure based on crystal plasticity

A Cohesion-Friction Combined Hardening Plastic Model of Concrete with the Nonorthogonal Flow Rule: Theory and Numerical Implementation

An Accurate and Explicit Approach to Modeling Realistic Hardening‐to‐softening Transition Effects of Metals

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

A constitutive model on flow stress prediction from the contribution of twin and grain refinement, strain and strain rate during surface mechanical attrition treatment of metals

Upper-Bound Rigid-Plastic Constitutive Model for Mixed-Hardening Materials with Micro Void Evolution Process

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

On the Development of Material Constitutive Model for 45crnimova Ultra-High-Strength Steel

A mixtures-based model for the grain size dependent mechanical behavior of nanocrystalline materials

A general physics-based hardening law for single phase metals

A Unified Model for Coupling Constitutive Behavior and Micro-Defects Evolution of Aluminum Alloys under High-Strain-rate Deformation

A STRAIN HARDENING MODEL REFLECTING STRESS PATH CORRELATION OF CORASE-GRAINED MATERIALS

A generalized thermodynamic approach for modeling nonlinear hardening behaviors

Evaluation of Anisotropic Constitutive Models: Mixed Anisotropic Hardening and Non-Associated Flow Rule Approach

A Modified Steinberg–Cochran–Guinan Model Applicable to Solid–liquid Mixed Zone along the Principle Hugoniot

Constitutive modeling of the tension-compression behavior of gradient structured materials

A finite strain micromechanical-based constitutive model: Application to porous polycrystal