Abstract:With global warming and the depletion of fossil energy sources, renewable energy is gradually replacing non-renewable energy as the main energy in the future. As one of the fastest growing renewable energy sources, the safety and reliability of wind energy have been paid more and more attention. The size of modern wind turbines is becoming larger and larger. As the main component of wind turbines to capture energy, the blade is often damaged by various complex environments and irregular loads. Therefore, the health monitoring and damage identification of wind turbine blades have become a main research focus. At present, in addition to the overview of various detection methods of wind turbine blades, there is a lack of comprehensive classifications and overviews of the main damage types, damage-generation mechanisms, and basic principles of the damage-detection technology of wind turbine blades. In this paper, firstly, the common fault types of wind turbine blades, such as trailing edge cracking, lightning strike, leading edge corrosion pollution, icing, and delamination, as well as their generation mechanism, are comprehensively analyzed. Then, the basic principles and the latest research progress of the current main detection technologies, such as vision, ultrasonic, thermal imaging, vibration, acoustic emission, and so on, are comprehensively reviewed. The advantages and limitations of the various detection technologies for practical application are summarized. Finally, through a comparative analysis of the various damage-detection technologies, we try to find potential future research directions, and draw conclusions. This paper will provide a reference for understanding the mechanism behind the main damage types and the damage-detection methods of wind turbine blades. It has important reference value for further promoting practical research of wind turbine blade damage-detection technology and grasping this research direction.

Research on the Defect Types Judgment in Wind Turbine Blades Using Ultrasonic NDT

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

AE health monitoring technique for composite wind turbine blade: a state-of-art review

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Review on the Damage and Fault Diagnosis of Wind Turbine Blades in the Germination Stage

The application of ultrasonic phased array technology in wind turbine blade defect detection system

Damage Mode Identification and Singular Signal Detection of Composite Wind Turbine Blade Using Acoustic Emission

Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing

Study on Air Bubble Defect Evolution in Wind Turbine Blade by Infrared Imaging with Rheological Theory

Defect Detection on a Wind Turbine Blade Based on Digital Image Processing

Development of Digital-Image-Correlation Technique for Detecting Internal Defects in Simulated Specimens of Wind Turbine Blades

Classification of internal defects of gas turbine blades based on the discrimination of linear attenuation coefficients

Interlaminar Shear Properties and Acoustic Emission Monitoring of the Delaminated Composites for Wind Turbine Blades

Non-Contact Wind Turbine Blade Crack Detection Using Laser Doppler Vibrometers

Microscopic Failure Criterion and Damage Evolution of Composite Material Wind Turbine Blades

Review of the Typical Damage and Damage-Detection Methods of Large Wind Turbine Blades

A New Approach for Fault Detection, Location and Diagnosis by Ultrasonic Testing

Ultrasonic inspection of the surface crack for the main shaft of a wind turbine from the end face

Natural Frequency Transmissibility for Detection of Cracks in Horizontal Axis Wind Turbine Blades

Damage identification of wind turbine blades using the microphone array under different parametric and measuring conditions: A prototype study with laboratory-scale models

Crack Diagnosis of Wind Turbine Blades Based on EMD Method