Abstract:During the manufacturing and service process of turbine blades, various types of defects may be formed and bring huge threat to the safe operation of gas turbine. However, if qualifying the turbine blade only by the existence of defects, it will lead to the unavoidable large waste. Preferably, it should determine whether the turbine blades with defects could be in safe service for some period of time. Therefore, the residual strength and fatigue life should be analyzed and predicted based on the three-dimensional feature of defect, such as size, location. Considering the characteristics of shape (free-from surface) and material (high density superalloy), the radiographic imaging based techniques could be used in the non-destructive testing of turbine blades. For one thing, although the industrial computed tomography can obtain the three-dimensional feature of defects, the low efficiency and high cost may limit its practical application. For another, the projective nature of digital radiographic imaging technique results in the unavailability of geometric parameter in the transmitting direction and brings difficulty to the three-dimensional characterization of defect. Aiming at this critical issue, a new method based on the determination of mapping relationship between the thickness of material and the gray value of image is presented in this paper. By acquiring the thickness of two defects in a gas turbine blade, the three-dimensional geometric parameter (volume) can be calculated. Finally, the accuracy of the proposed method is verified using a test specimen. In comparison with the industrial CT, the proposed method could have relative high efficiency and low cost in the application of the three-dimensional quantitative characterization of defects for gas turbine blades.

Study on Air Bubble Defect Evolution in Wind Turbine Blade by Infrared Imaging with Rheological Theory

Research on Boundary Conditions of T Steam Turbine Blade by Finite Element Model Analysis

Dependence of Microstructural Evolution on the Geometric Structure for Serviced DZ125 Turbine Blades

Microstructure Degradation of Service-Exposed Turbine Blades Made of Directionally Solidified DZ125 Superalloy

Development of Digital-Image-Correlation Technique for Detecting Internal Defects in Simulated Specimens of Wind Turbine Blades

Condition Monitoring of Wind Turbine Blades Using Active and Passive Thermography

Research on the Defect Types Judgment in Wind Turbine Blades Using Ultrasonic NDT

Induction Infrared Thermography and Thermal-Wave-Radar Analysis for Imaging Inspection and Diagnosis of Blade Composites

Microscopic Failure Criterion and Damage Evolution of Composite Material Wind Turbine Blades

Research on Infrared Thermal Wave Non-destructive Inspection Technology of Turbine Blades

3D Positioning of Defects for Gas Turbine Blades Based on Digital Radiographic Projective Imaging

Detection of Three-Dimensional Parameter of Defects for Gas Turbine Blades Based on Two-Dimensional Digital Radiographic Projective Imaging

Thermal Inspection of Subsurface Defects in Wind Turbine Blade Segments under the Natural Solar Condition

Mechanism Study on Fracture of Turbine Blade

Research on vibration fatigue behavior of blade structures based on infrared thermography

A Numerical Method for the Dynamics Analysis of Blade Fracture Faults in Wind Turbines Using Geometrically Exact Beam Theory and Its Validation

Formation mechanism and detection and evaluation methods as well as repair technology of crack damage in fiber-reinforced composite wind turbine blade: a review

Review on the Damage and Fault Diagnosis of Wind Turbine Blades in the Germination Stage

An Investigation Of The Failure Of Low Pressure Steam Turbine Blades

3D Detection of Internal Defects for Gas Turbine Blades

Failure Analysis of the Final Stage Blade in Steam Turbine