Abstract:The increasing utilization of CO2 for synthesizing high-value fuels or essential chemicals is a potentially effective approach to mitigating global warming and climate change. Compared to thermal catalytic CO2 conversion under harsh operating conditions (400∼500°C, 10 MPa), non-thermal plasma can overcome kinetic barriers and trigger reactions beyond thermal equilibrium at ambient temperature and pressure. In this study, the effects of operating conditions (discharge frequency, input power, and gas flow rate) and geometrical parameters (discharge length, discharge gap, and dielectric materials) have been extensively analyzed using typical cylindrical dielectric barrier discharge (DBD) plasma. The discharge characteristics changed by operating conditions (including waveforms of applied voltage and current) are compared, indicating higher applied voltage and lower gas flow rate can strengthen the filamentary discharges. The results demonstrate CO2 conversion rate increases with the increase of applied voltage and the decrease of CO2/H2 ratio, achieving its maximum value of 43.0% at 20 mL/min. The highest energy efficiency of 3771.9 μg/kJ for CO generation is obtained at the applied voltage of 5.5 kV and gas flow rate of 40 mL/min, respectively. Besides, the structure of plasma reactor also impacts the performance of CO2 conversion. On the one hand, the discharge gap has a significant role in the variation of CO2 conversion and product selectivity, which is attributed to the electric field density and corresponding electron-induced reaction. On the other hand, the circulating water-cooling jacket was used to find out the influence of reaction temperature, which switched the product from CO to CH4. This work will pave the way for a sustainable alternative towards future CO2 conversion and utilization.

Hydrogen Production from Methanol Decomposition in a Gliding Arc Discharge Plasma with High Processing Capacity

Enhanced hydrogen production by methanol decomposition using a novel rotating gliding arc discharge plasma

Enhanced hydrogen production from methanol by liquid-phase array electrode plasma discharge

Non-oxidative Decomposition of Methanol into Hydrogen in a Rotating Gliding Arc Plasma Reactor

Hydrogen Production from Methane Decomposition Using a Mobile and Elongating Arc Plasma Reactor

Methane Incorporation into Liquid Fuel by Non-Equilibrium Plasma Discharges

Rotating Gliding Arc Assisted Methane Partial Oxidation for Hydrogen Production

Hydrogen Production from Methane Decomposition in Cold Plasma Reactor with Rotating Electrodes

Plasma Activation of Methane for Hydrogen Production in a N2 Rotating Gliding Arc Warm Plasma: A Chemical Kinetics Study

Rotating Gliding Arc Assisted Methane Decomposition in Nitrogen for Hydrogen Production

Gliding Arc Discharge Plasma Assisted Decomposition of Ammonia into Hydrogen

Hydrogen Production From Partial Oxidation Of Methane Using An Ac Rotating Gliding Arc Reactor

Warm plasma catalytic coreforming of dilute bioethanol and methane for hydrogen production

Efficient Plasma Technology for the Production of Green Hydrogen from Ethanol and Water

GLIDING ARC DISCHARGE PLASMA ASSISTED REFORMING OF METHANE INTO HYDROGEN WITH OXYGEN AND WATER VAPOR

Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Nonthermal Atmospheric Plasma Reactors for Hydrogen Production from Low-Density Polyethylene

Production of pure hydrogen from methane by low temperature plasma processing

Hydrogen generation by dielectric barrier discharge plasma assisted ammonia decomposition

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process