Abstract:Membrane absorption is a novel method for acid gas removal compared to conventional separation techniques. The current study presents the simulation results using a computational fluid dynamics (CFD) method for biogas purification. A comprehensive two-dimensional (2D) mass-transfer model was developed and solved in a hollow fiber membrane contactor (HFMC) under a non-wetted condition. H2O, triethanolamine (TEA), diethanolamine (DEA), monoethamolamine (MEA), and potassium argininate (PA) were used as the absorbent liquids. The effects of gas liquid parameters and membrane characteristics on the CO2 removal efficiency and absorption flux and CH4 recovery were systematically examined and evaluated. The comparisons between model predictions and experimental data with various gas liquid parameters were in good agreement. An increase of gas velocity and CO2 content caused an increase of CO2 flux and a decrease of CO2 removal efficiency and CH4 recovery; however, an increase of absorbent velocity and concentration caused an increase in the above three values. In addition, a smaller fiber inner diameter and membrane thickness and a longer module were good for the biogas upgrading process. It should be noted that the highest CO2 flux coincided with the original module dimensions. The simulation predictions also showed that PA provided better membrane module performance than other absorbents. The order for CO2 absorption efficiency and CH4 recovery was PA > MEA > DEA > TEA > H2O. Overall, the developed model provides the guidelines for selecting the optimum module properties and fluid conditions. The membrane gas absorption technique has shown great potential in biogas upgrading.

Modeling of CO2 Separation from Flue Gas by Methyldiethanolamine and 2-(1-Piperazinyl)-Ethylamine in Membrane Contactors: Effect of Gas and Liquid Parameters

Investigation of CO2 Absorption in Methyldiethanolamine and 2-(1-piperazinyl)-ethylamine Using Hollow Fiber Membrane Contactors: Part C. Effect of Operating Variables

CFD investigation of CO2 capture by methyldiethanolamine and 2-(1-piperazinyl)-ethylamine in membranes: Part B. Effect of membrane properties

Experimental study on the absorption of CO 2 from flue gas by aqueous solutions of methyldiethanolamine + potassium glycinate in hollow fiber membrane contactor

Analysis Of Co2 Capture From Power-Plant Flue Gas Using The Membrane Gas Absorption (Mga) Method

Experimental and Modeling Study of Trace CO2 Removal in a Hollow-Fiber Membrane Contactor, Using CO2-Loaded Monoethanolamine

A Rigorous Model for Absorption of Carbon Dioxide into Aqueous N-Methyldiethanolamine Solution

Experiment of CO_2 Separation from Flue Gases by Membrane Gas Absorption

Performance evaluation and optimization of hollow fiber membrane contactors for carbon dioxide absorption: A comparative study of ammonia, ethanolamine, and diethanolamine solvents

Numerical Study on Absorption of Carbon Dioxide and Mass Transfer Performance in Hollow Fiber Membrane Contactor

Mixed Amine Absorbent based on Hollow Fiber Membrane Contactor Removes CO2 from Flue Gas

Optimization of Blended Amines for Co2 Absorption in A Hollow-Fiber Membrane Contactor

Numerical Simulation And Analysis Of Co2 Removal In A Polypropylene Hollow Fiber Membrane Contactor

Numerical investigation of the effects of polypropylene hollow fibre membrane structure on the performance of CO2 removal from flue gas

CO2 separation from flue gases by polypropylene hollow fiber membrane contactor

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

Influence of Absorbent Composition and Operating Parameters on CO2 Removal Efficiency Using Aqueous Blends of 1-Dimethylamino-2-propanol in Tray Column

Modeling of Membrane-Based Absorption of CO2 into Complex Solution

Modeling of CO2 Stripping in a Hollow Fiber Membrane Contactor for CO2 Capture

Dynamic Modeling of Biogas Upgrading in Hollow Fiber Membrane Contactors

Theoretical investigations on the effect of absorbent type on carbon dioxide capture in hollow-fiber membrane contactors