Abstract:In this work, the effect of the addition of different amounts of TiO 2 nanotubes to a PtRu catalyst supported on Vulcan XC-72R carbon black for methanol oxidation was studied. Two approaches were used for the catalyst preparation. In the first case, Pt and Ru metal ions were impregnated onto the support (C-TiO 2 ) and subsequently reduced with NaBH 4 . In the second case, the metal ions were first reduced and then impregnated, in order to obtain a catalyst with metal loading of 30 % of PtRu (50:50 at.% composition of Pt/Ru) and varying concentrations of TiO 2 (5–15 wt%); the actual composition was determined by inductively coupled plasma optical emission spectrometry (ICP-OES) analysis. The electrochemical properties were studied via cyclic voltammetry and chronoamperometry in 0.5 M H 2 SO 4 solution. X-ray diffraction analyses indicated the formation of PtRu alloy with different degrees of alloying. The CO-stripping voltammetry studies showed that both the onset potential and the peak potential are dependent on the catalyst composition; the PtRu/C-TiO 2 (10) exhibited a relatively higher CO oxidation current compared to those exhibited by the other catalysts. Both the linear sweep voltammetry and the chronoamperometric results also demonstrated that the PtRu/C-TiO 2 (10) catalyst exhibited a higher methanol oxidation current and a lower poisoning rate among the investigated catalysts with various TiO 2 nanotube contents (i.e., 0, 5, and 15 % TiO 2 ). The prepared catalysts revealed essentially the same catalytic performance independently of the procedure used for their preparation.

Si Doping Influence on the Catalytic Performance of Pt/TiO2 Mesoporous Film Catalyst for Low-Temperature Methanol Combustion

Striking Size and Doping Effects of Ti-Si-O Clusters on Methane Conversion Reactions

The Effect of the Presence of Ceria on the Character of Tio2 Mesoporous Films Used As Pt Catalyst Support for Methanol Combustion at Low Temperature

A Photo-Reduction Method for Enhancing Catalytic Activity of Pt-Loaded Ordered Mesoporous TiO2 Film Catalyst in Methanol Combustion at Low Temperature

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Boosting Toluene Combustion in Pt-Co3O4 Catalysts by Directional Tuning Strong Metal-Support Interactions Through Metal-Organic Template Pyrolysis

Cu and Si Co-Doping on TiO2 Nanosheets to Modulate Reactive Oxygen Species for Efficient Photocatalytic Methane Conversion.

Preparation of Ordered Mesoporous Tio2 Thin Film and Its Application in Methanol Catalytic Combustion

Preparation of Pt/Al2O3 catalyst and its performance on methanol catalytic combustion at low temperature

The Effect of TiO 2 on the Catalytic Activity of a PtRu/C Catalyst for Methanol Oxidation

Pt/C Doped TiO<SUB>2</SUB>/SWNTs As Catalyst for Methanol Oxidation

Pt@TiOx/TiO2 as a highly effective and stable recipe for C3H8 and C3H6 combustion

Improved charge transfer and morphology on Ti-modified Cu/γ-Al 2 O 3 /Al catalyst enhance the activity for methanol steam reforming

Chemical Composition and Surface Roughness of AlOx-Controlled Activity of Pt/AlOx Thin Film Catalysts for Methanol Oxidation Reaction

Improved Charge Transfer and Morphology on Ti-modified Cu/γ-Al2O3/Al Catalyst Enhance the Activity for Methanol Steam Reforming

Titanium carbide nanoparticles supported Pt catalysts for methanol electrooxidation in acidic media

Variation in Metal–Support Interaction with TiO2 Loading and Synthesis Conditions for Pt-Ti/SBA-15 Active Catalysts in Methane Combustion

Properties of Cu/ZnO/Al2O3 Catalysts Modified by Titanium Additives in Synthesis of Methanol from Syngas Using Orthogonal Experimental Design

Low-temperature methanol synthesis catalyzed over Cu/γ-Al2O3–TiO2 for CO2 hydrogenation

Promotion effect of TiO2 on Ni/SiO2 catalysts prepared by hydrothermal method for CO2 methanation

Plasma-induced Synthesis of Pt Nanoparticles Supported on TiO 2 Nanotubes for Enhanced Methanol Electro-Oxidation