Abstract:[Purposes]38CrMoAl steel is often used as pistons in a hydraulic pump,its surface performance is especially important for long-life safe working.Wear is the main failure mode of pistons in a hydraulic pump.With surface strengthening treatment,it is able to break through its performance limit and realize high performance and reliable operation of a hydraulic pump.[Methods]In this work,the pattern and performance on the surface of 38CrMoAl steel has been regulated by a duplex treatment of surface texturing(ST)and active screen plasma nitriding(ASPN),aiming to achieve strengthening on its surface.Dimple texture with different shapes were first prepared on 38CrMoAl steel surface by laser processing technology.38CrMoAl steel samples with and without textured surface have been treated by ASPN.A ball-on-disc friction and wear testing machine was employed to investigate the effect of surface texture-active screen plasma nitriding duplex treatment on the tribological behavior of 38CrMoAl steel.[Findings]The results show that ASPN layer is mainly built up by the phases of e-Fe2_3N,γ'-Fe4N and CrN.The ASPN layer is compact,and free of obvious cracks and holes.Meanwhile,it is found that the uniform and continuous ASPN layer consists of a white bright layer and a diffusion layer.The hardness across surface to the inside of the ASPN layer has demonstrated a gradient distribu-tion,where the highest hardness value is detected on the surface,and the hardness decreases as the distance from the surface increases.According to the dry sliding friction results of 38CrMoAl steel related samples against Al2O3 balls,the coefficients of friction of 38CrMoAl steel and ST+ASPN-38CrMoAl steel are 0.40 and 0.36,respectively.The ST+ASPN-38CrMoAl steel pres-ents a 92.5％reduction in mass loss,as compared with 38CrMoAl steel.It can be concluded that surface texturing-active screen plasma nitriding duplex treatment endows the working surface of 38CrMoAl steel with enhanced tribological performance.

Tribological Performance of Surfaces Enhanced by Texturing and Nitrogen Implantation

Tribological Performances of Textured Surfaces Prepared by Electrodeposition Method

MODIFICATION OF TRIBOLOGICAL CHARACTERISTICS OF METALS AFTER NITROGEN IMPLANTATION

Improvement of Tribological Behavior of a Ti–Al–Zr Alloy by Nitrogen Ion Implantation

Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel

High-temperature tribological properties of AlCrN coatings deposited on textured surfaces under dry friction

Improving the Bio-Tribological Properties of Ti6Al4V Alloy via Combined Treatment of Femtosecond Laser Nitriding and Texturing

Tribological Performances of Molded Micro-Cratered Surface of Superelasticity TiNi Alloy

Characterization and tribological properties of Cr-N films by ion beam enhanced deposition

Effect of Triangular Texture on the Tribological Performance of Die Steel with Tin Coatings under Lubricated Sliding Condition

Combined Effect of a Laser Cladded Coating and Surface Texture on Tribological Performance Under Dry Sliding and Starved Lubrication

Effect of ion beam etching on the tribological performance of laser textured Co-Cr-Mo alloy

Tribological performance of Ti-6Al-4V plasma-based ion implanted with nitrogen

Tribological Behavior of Aluminum Alloys Surface Layer Implanted with Nitrogen Ions by Plasma Immersion Ion Implantation

Improvement of tribological properties of 9Cr18 bearing steel using metal and nitrogen plasma-immersion ion implantation

Effects of Texture Geometry on the Tribological Performance of Brass with a TiN Coating under Lubricated Rotation

Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding

Effect of Surface Texture-Active Screen Plasma Nitriding Duplex Treatment on Tribological Behavior of 38crmoal Steel

Effect of Implantation Sequence on Tribological Behavior of GCr15 Steel by PBII

Enhanced Tribological Properties of CrN Coatings on Densified Surfaces of Fe-Based Porous Materials Obtained Through Powder Metallurgy and Ultrasonic Shot Peening Treatment

Improvement of tribological behavior of a Ti-Al-V alloy by nitrogen ion implantation