Abstract:Atomic force microscopy (AFM) tip-based nanofabrication is as a powerful method to machine nanostructures. However, the traditional AFM scratching process suffers from low processing efficiency and a low rate of material removal. Thus, an AFM tip-based nanomilling method was previously proposed to improve the machining efficiency and material removal rate; however, the machining mechanism of the nanomilling process, especially on hard-brittle silicon crystals, is not well understood. In this study, we used an AFM tip-based nanomilling approach to machine nanochannels on single-crystal silicon to investigate the machining mechanism (i.e., the material removal state, undeformed chip thickness, the brittle-to-ductile transition, and subsurface damage). For the first time, we established a theoretical model for tip-based nanomilling with a constant normal load to predict the machined depth. Nanochannels fabricated with a wide range of feed directions, crystal orientations, and tip trajectories were obtained, which provided a reference for machining high-quality nanochannels and an in-depth understanding of the nanomilling of single-crystal silicon. The experimental results demonstrated that we could machine a nanochannel without pile-ups by selecting a specific trajectory with a feed smaller than 4 nm in the 0 degrees direction, a normal load no greater than 120 mu N, and a crystal orientation at rotation angles of 135 degrees, 157.5 degrees, or 180 degrees. Moreover, transmission electron microscope analysis of the subsurface of the nanochannel revealed a large number of dislocations, stacking faults, and a layer of amorphous silicon. Our findings are of great significance for obtaining high-quality nanochannels with a predicable machined depth and understanding the nanomilling mechanism of hard-brittle materials.

Depth Prediction Model of Nano-Grooves Fabricated by AFM-based Multi-Passes Scratching Method

Investigation on friction behavior and processing depth prediction of polymer in nanoscale using AFM probe-based nanoscratching method

Modelling and experimental study of nanoscratching process on PMMA thin-film using AFM tip-based nanomachining approach

Effects of AFM Tip-Based Direct and Vibration Assisted Scratching Methods on Nanogrooves Fabrication on a Polymer Resist

Modelling and experimental study of machined depth in AFM-based milling of nanochannels

Modeling and Experimental Study of Machining Outcomes when Conducting Nanoscratching Using Dual-Tip Probe on Single-Crystal Copper

Investigation of Cutting Depth and Contact Area in Nanoindenter Scratching

Implementation of AFM Tip-Based Nanoscratching Process on Single Crystal Copper: Study of Material Removal State

Effect of Cantilever Deformation and Tip-Sample Contact Area on AFM Nanoscratching

Direction-identical Scratching Method for Fabricating Nanostructures Using a Modified AFM Nanoscratching System

Study on the Processing Outcomes of the Atomic Force Microscopy Tip-Based Nanoscratching on GaAs

Depth Control Method of AFM-Based Nanomachining with Diamond Tip in Deflection Mode

Fabrication of None-Ridge Nanogrooves with Large-Radius Probe on Pmma Thin-Film Using Afm Tip-Based Dynamic Plowing Lithography Approach

AFM tip-based mechanical nanomachining of 3D micro and nano-structures via the control of the scratching trajectory

Influence of Double-Tip Scratch and Single-Tip Scratch on Nano-Scratching Process Via Molecular Dynamics Simulation

Towards Understanding the Machining Mechanism of the Atomic Force Microscopy Tip-Based Nanomilling Process

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Theoretical and Experimental Investigation of Vibration-Assisted Scratching Silicon

Investigation of Lateral Force in Tip-Based Nanofabrication

Study on the Machined Depth when Nanoscratching on 6H-Sic Using Berkovich Indenter: Modelling and Experimental Study

Effect of material removal state on the selection of theoretical models when scratching single-crystal copper using the load modulation approach