Abstract:Four types of Ce0.67Zr0.33O2 (CZCP, CZH, CZHP and CZM) mixed oxides as supports were prepared by coprecipitation, hydrothermal, homogeneous precipitation and microemulsion methods, respectively. The results show that both the preparation methods and the aging procedures have significant influences on the physicochemical properties of Ce0.67Zr0.33O2 mixed oxides. All these fresh Ce0.67Zr0.33O2 samples develop mesopore structure, especially that, CZCP obtains the largest diameter (20.87nm) and volume (0.455cm3/g). The XRD results indicate that fresh CZHP and CZCP samples contain cubic and tetragonal phases, while only cubic solid solution is found in fresh CZH and CZM samples, which show better low-temperature reducibility. Moreover, higher oxygen storage capacity complete (OSCC) values and faster O2 uptake are observed in CZH and CZM samples compared with those of fresh CZCP and CZHP. After calcination at 1100°C, it is found that the OSCC values and the kinetics of the O2 uptake for CZM and CZHP samples are deteriorated due to the coexistence of cubic and tetragonal phases as well as strong sintering of samples. On the contrary, the aged CZCP and CZH samples keep satisfactory low-temperature reducibility and oxygen storage capacity. For fresh catalysts, the pore-size distribution of mixed oxides seems to be important for catalytic activities. In contrast, for aged catalysts, their activities are related to both the redox properties and the textural properties of aged mixed oxides. Therefore, the Pd-only three-way catalyst supported on the CZCP exhibits the most promising amplified amplitude of stoichiometric window.

Three-way catalytic performance of Pd/Ce0.67Zr0.33O2–Al2O3 catalysts: Role of the different Pd precursors

Three-way Catalytic Performance of a Pd/Ce0.67Zr0.33O2–Al2O3 Catalyst for Automotive Emission Control: the Role of Pretreatment Gas

Redox properties and metal–support interaction of Pd/Ce0.67Zr0.33O2–Al2O3 catalyst for CO, HC and NOx elimination

Redox Properties And Metal-Support Interaction Of Pd/Ce0.67zro.3302-Al203 Catalyst For Co, Hc And No Elimination

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

The Effect of Pd Precursor on Pd/Ce0.67Zr0.33O2 Catalysts for Automotive Emission Control

Redox Behavior of Active PdOx Species on (ce,zr)xo2–al2o3 Mixed Oxides and Its Influence on the Three-Way Catalytic Performance

Effect of PdO Structure Properties on Catalytic Performance of Pd/Ce0.67Zr0.33O2 Catalyst for CO, HC and NO Elimination

Preparation of Cex Zr1-x-AI mixed oxides and investigation of the palladium-only three-way catalytic performance

Performance of dynamic oxygen storage capacity, water–gas shift and steam reforming reactions over Pd-only three-way catalysts

Comparative study of three-way catalytic performance over Pd/CeO2-ZrO2-Al2O3 and Pd/La-Al2O3 catalysts: New insights into microstructure and thermal stability

Investigation on properties of Pd/CeO2-ZrO2-Pr2O3 catalysts with different Ce/Zr molar ratios and its application for automotive emission control

Morphology Controllable Synthesis of Pd/CeO2–ZrO2 Catalysts and Its Structure-Activity Relationship in Three-Way Catalytic Performance

Understanding the three-way catalytic reaction on Pd/CeO2 by tuning the chemical state of Pd

Effects of CeO2-ZrO2 Present in Pd/Al2O3 Catalysts on the Redox Behavior of PdOx and Their Combustion Activity

Preparation of Ce0.67Zr0.33O2 mixed oxides as supports of improved Pd-only three-way catalysts

Preparation of ceria-zirconia by modified coprecipitation method and its supported Pd-only three-way catalyst

Investigation on the structure-activity relationship of BaO promoting Pd/CeO 2 -ZrO 2 catalysts for CO, HC and NO x conversions.

Influence of thermal treatment on catalytic performance of Pd/(Ce,Zr)Ox–Al2O3 three-way catalysts

Boosting the Catalytic Performance of Al2O3-supported Pd Catalysts by Introducing CeO2 Promoters.

The Promotional Effect of Transition Metals on the Catalytic Behavior of Model Pd/Ce0.67Zr0.33O2 Three-Way Catalyst