Investigation on the Structure- Activity Relationship of Bao Promoting Pd/ Ceo2-Zro2 Catalysts for Co, Hc and Nox Conversions

Ting Wang

DOI: https://doi.org/10.1039/c6cp08459a

IF: 3.3

2017-01-01

Physical Chemistry Chemical Physics

Abstract:The reasons for the variation in catalytic activity of BaO promoting Pd/CeO2–ZrO2 catalysts prepared via different methods are revealed.

What problem does this paper attempt to address?

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Lei Ma,Meng-Fei Luo,Li-Feng Han,Song-Ying Chen

DOI: https://doi.org/10.1023/A:1010313605332

2000-01-01

Reaction Kinetics and Catalysis Letters

Abstract:In this paper, the Ce X Zr 1-X O 2 -supported PdO catalysts were prepared and the effect of Ce/Zr ratio on catalytic activity for CO and methane oxidation was studied, both activity and the reduction behavior of catalyst depend on the Ce/Zr ratio. The reduction behavior of those catalysts was characterized by means of TPR.
Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

Ma Lei,Lu Chunshan,Zhang Qunfeng,Li Xiaonian

2010-01-01

Rare Metal Materials and Engineering

Abstract:The CexZr1-xO2 (x=0-1) composite oxides were prepared by sol-gel method, and then they were used as supportpr tp prepare PdO/CexZr1-xO2 catalysts. The effect of Ce/Zr atomic ratio on the structure of crystalline phase, redox property and TWC catalytic activity of CexZr1-xO2 composite oxides and PdO/CexZr1-xO2 catalysts were studied. The results show that phase structure of CexZr1-xO2 composite oxide depends on the CeO2 content. The different Ce/Zr atomic ratio affects the catalytic activity of PdO/CexZr1-xO2 catalysts much. In the reaction of NO-CO and CO-O-2, the catalytic activity of PdO/Ce0.8Zr0.2O2 catalyst is the highest. However, the catalytic activity of PdO/Ce0.5Zr0.5O2 catalyst is the highest in the reaction of CH4-O-2. The alpha: H-2-TPR peak is related probably to the NO-CO and CO-O-2 catalytic activity of PdO/Ce0.8Zr0.2O2 catalysts.
Effect of PdO Structure Properties on Catalytic Performance of Pd/Ce0.67Zr0.33O2 Catalyst for CO, HC and NO Elimination

Ting Wang,Xiaolin Guo,Siyu Lin,Renxian Zhou

DOI: https://doi.org/10.1016/j.jre.2018.10.017

IF: 4.632

2019-01-01

Journal of Rare Earths

Abstract:Pd/Ce0.67Zr0.33O2 catalyst was pretreated in different atmosphere respectively, and characterized by CO chemical adsorption, XPS, HR-TEM, H2-TPR, Raman, OSC and in situ DRIFTs to investigate the effect of the structure properties of PdOx species on the catalytic performance for CO, HC and NOx elimination. The results show that Pd/CZ catalyst pretreated in air atmosphere has higher oxidation activity of HC due to having high Pd dispersion and strong interaction between PdOx and CZ support. Pd/CZ-H catalyst pretreated in reducing atmosphere exhibits better catalytic performance of NOx elimination because of having relatively big Pd particle size, more Pd species in metallic state and higher concentration of oxygen vacancies. While for the Pd/CZ-RG catalyst pretreated in reactant atmosphere, strong adsorption of HC species on the surface of catalysts would lead to a part of active sites being covered, which inhibits HC and NO conversions.
Probing BaO Doping Effect on the Structure and Catalytic Performance of Pd/CexZr1–xO2 (x = 0.2–0.8) Catalysts for Automobile Emission Control

Linyan Yang,Xue Yang,Renxian Zhou

DOI: https://doi.org/10.1021/acs.jpcc.5b10301

2016-01-01

Abstract:Pd/CeO2-ZrO2-BaO (Pd/CZB) catalysts with 5.0 wt % BaO and different CeO2/ZrO2 molar ratio were synthesized. The modification with BaO significantly promotes the catalytic activity of HC and NO conversions when the molar ratio of CeO2 to ZrO2 is 2/1, because the substitution of Cex+/Zr4+ ions by Ba2+ promotes the formation of oxygen vacancy as revealed by XRD refinement analysis results and improves the mobility of active oxygen as a result of electronic and structural modifications. Among the Ba-doped catalysts, the crystalline form of the CZB supports gradually transform from cubic and pseudocubic to stable tetragonal phase as the increase of ZrO2 content. Meanwhile, the Raman results show that addition of moderate ZrO2 promotes the formation of structural defects, resulting in higher OSC and NOx storage efficiency. On the other hand, the introduction of moderate ZrO2 facilitates the dissociative adsorption of NO and promotes the deep oxidation of HC. Therefore, Pd/CZB catalysts with CeO2/ZrO2 molar ratio of 3/1-1/1, especially Pd/CZB21, show a much better catalytic activity of HC and NOx eliminations and a wider dynamic operation window. Zr-rich catalysts present worse catalytic activity of CO oxidation compared with Ce-rich catalysts, which is mainly arising from the decreased amount of active sites. After thermal aging treatment, Zr-rich catalysts (CeO2/ZrO2 < 1) undergo less severe deterioration of the catalytic activity compared with Ce-rich catalysts (CeO2/ZrO2 >= 1) as a result of better thermostability, and Pd/CZB11-a presents the best catalytic performance and widest dynamic operation window.
Investigation on properties of Pd/CeO2-ZrO2-Pr2O3 catalysts with different Ce/Zr molar ratios and its application for automotive emission control

Xue Yang,Linyan Yang,Siyu Lin,Renxian Zhou

DOI: https://doi.org/10.1016/j.jhazmat.2014.10.062

2015-03-21

Abstract:Pd/CeO2-ZrO2-Pr2O3 (CZP) catalysts with different Ce/Zr molar ratios were synthesized and systematically investigated by XRD, N2 adsorption-desorption, XPS, H2-TPR, OSC and in situ DRIFTS techniques. The results of XPS, in situ DRIFTS, etc., show that the number of oxygen vacancies increases with the increasing Zr content and thus leads to the enhanced metal-support interaction and the accelerative formation rate of nitrate, formate, acetate and carbonate species, resulting in improving catalytic performance for HC and NO elimination, especially for Pd/CZP catalysts with Ce/Zr from 1/2 to 1/3. While Pd/CZP catalysts with higher OSC value (Ce/Zr=4/1-1/2) exhibit better catalytic activity of CO and NO2 elimination. An appropriate concentration of Zr facilitates the diffusion of Pr from the surface to the bulk of the CZP supports, thus forming more homogeneous CZP solid solution and improving the structure/textual stability, which promotes the thermal stability of catalysts. Pd/CZP catalysts with Ce/Zr from 2/1 to 1/2 exhibit good thermal stability.
Redox properties and metal–support interaction of Pd/Ce0.67Zr0.33O2–Al2O3 catalyst for CO, HC and NOx elimination

Siyu Lin,Linyan Yang,Xue Yang,Renxian Zhou

DOI: https://doi.org/10.1016/j.apsusc.2014.03.153

IF: 6.7

2014-01-01

Applied Surface Science

Abstract:Ce0.67Zr0.33 02, Ce0.67Zr0.3302-Al203 and -y-Al203 supported Pd catalysts (designated as Pd/CZ, Pd/CZA and Pd/Al2 03) have been characterized by XRD, CO chemisorption, in situ DRIFTS, XPS, HRTEM, H2-TPR, 02-TPSR and catalytic performance test. The results show that the small Pd0, particles dispersed in CZ would promote the conversion of HC, CO and NO2, while the Pd0, particles dispersed in Al203 promote the conversion of NO in the light-off process. Pd0, species mainly disperse on Al203-rich grains surface for fresh Pd/CZA catalyst, but easily migrate onto CZ-rich grains surface due to the strong interaction between Pd and ceria-based oxide under high temperature reaction conditions. And it promotes the thermal stability of Pd 0 species and resilience of Pd to Pd 0, therefore enhances the catalytic performance for HC, CO and NO elimination. Meanwhile, the interaction between CZ and Al203 can be enhanced after aging treatment, resulting in increasing the thermal stability of Pd/CZA catalyst. 2014 Elsevier B.V. All rights reserved.
Design Structure for Cepr Mixed Oxide Catalysts in Soot Combustion

Lijia Fan,Kang Xi,Ying Zhou,Qiulian Zhu,Yinfei Chen,Hanfeng Lu

DOI: https://doi.org/10.1039/c6ra28722k

IF: 4.036

2017-01-01

RSC Advances

Abstract:Four CePr mixed oxides with different structures were designed and synthesized using a solid-phase grinding method: a uniform solid solution of Ce and Pr (CePr-NN), Pr6O11-coated CeO2 (CePr-NO), CeO2-coated Pr6O11 (CePr-ON), and particle packing of CeO2 and Pr6O11 (CePr-OO) were obtained, and characterized by XRD, H-2-TPR, TEM and TG. The results show that CePr-NN exhibits the best low temperature catalytic activity among the CePr catalysts. CeO2 is the major active phase on the surface of the CePr catalysts, and the use of Pr6O11 as the framework maintains the thermal stability of the CePr composite oxide. Moreover, both the oxygen storage capacity and mobility of the active oxygen of the catalyst were improved with the incorporation of Pr into CeO2, resulting in a higher combustion rate. The "molten state" which appeared during the preparation when nitrate was used as the precursor, plays a significant role in the migration of Ce and Pr, and is the premise of forming different structures of solid solution or coating structure.
Investigation of the NO removal by CO on CuO–CoOx binary metal oxides supported on Ce0.67Zr0.33O2

Lianjun Liu,Yu Chen,Lihui Dong,Jie Zhu,Haiqin Wan,Bin Liu,Bin Zhao,Haiyang Zhu,Keqin Sun,Lin Dong,Yi Chen

DOI: https://doi.org/10.1016/j.apcatb.2009.02.021

2009-01-01

Abstract:Binary metal oxides CuO–CoOx supported on Ce0.67Zr0.33O2 (denoted as CZ, thereafter) catalysts had been characterized by XRD, LRS, UV-DRS, IR, TPR, in situ FT-IR and activity test for the removal of NO by CO. Results suggested that (1) both copper oxide and cobalt oxide (loadings ≤0.5 and 0.32mmol/100m2 CZ, respectively) were highly dispersed on CZ support; (2) the addition of cobalt species promoted the reduction of the dispersed copper oxide, and improved the activity of copper oxide supported on CZ due to the strong interaction between active copper oxide and cobalt oxide, which was dependent on the preparation procedure and the cobalt oxide content; (3) the reduction of NO by CO over these catalysts went through different mechanisms at low and high temperatures, which was related to the change of the active species during the reaction process; (4) the introduction of cobalt oxide altered the adsorption type of NO and CO on these catalysts, and oxidized the NO dimers into ionic NO3−1. A possible reaction mechanism was proposed to discuss the NO+CO reaction based on all these results.
Investigation of the Physicochemical Properties and Catalytic Activities of Ce0.67M0.33O2(M = Zr4+, Ti4+, Sn4+) Solid Solutions for NO Removal by CO

Xiaojiang Yao,Changjin Tang,Zeyang Ji,Yue Dai,Yuan Cao,Fei Gao,Lin Dong,Yi Chen

DOI: https://doi.org/10.1039/c2cy20610b

IF: 6.177

2013-01-01

Catalysis Science & Technology

Abstract:NO removal by CO model reaction was investigated over a series of ceria-containing solid solutions, prepared by an inverse co-precipitation method, to explore the relationship between the physicochemical properties and catalytic performances of these catalysts. The synthesized samples were studied in detail by means of XRD, Raman, TEM, UV-Vis spectroscopy, N2-physisorption, H2-TPR, OSC, XPS and in situ FT-IR technologies. These results indicate that the incorporation of Zr4+, Ti4+ and Sn4+ into the lattice of CeO2 leads to a smaller grain size and enhanced reduction behavior. Furthermore, the catalytic performance test shows that the activities and selectivities of these solid solutions are higher than pure CeO2 and that the Sn4+-doped sample shows the best results. The reason may be that: (1) the decrease in grain size results in an enlargement of the BET specific surface area and an increase of surface Ce3+. The former is conducive for sufficient contact between the catalyst and reactant molecules and the latter contributes to the adsorption of COx species; (2) the enhanced reduction behavior is beneficial in generating more surface oxygen vacancies during the reaction process, which can weaken the N–O bond to promote the dissociation of NOx effectively. Finally, in order to further understand the nature of the catalytic performances for these samples, a possible reaction mechanism is tentatively proposed.
Morphology Controllable Synthesis of Pd/CeO2–ZrO2 Catalysts and Its Structure-Activity Relationship in Three-Way Catalytic Performance

Jie Wan,Xue Yang,Ting Wang,Yanjun Liu,Yuanyuan Zhou,Gongde Wu,Renxian Zhou

DOI: https://doi.org/10.1016/j.pnsc.2021.08.002

IF: 4.269

2021-01-01

Progress in Natural Science Materials International

Abstract:CeO2–ZrO2 mixed oxides with controlled morphologies (i.e., nanorod, nano-polyhedral and disordered shape) were synthesized through either hydrothermal or coprecipitation method, and the corresponding supported Pd/CeO2–ZrO2 catalysts were also prepared by conventional impregnation. The obtained catalysts were subjected to systematic structural/physio-chemical characterizations as well as three-way catalytic performance evaluations. The results showed that CeO2–ZrO2 mixed oxides presented different exposed crystal planes: namely disordered CZ-di mainly exposed (111) crystal planes, nanorod CZ-ro mainly exposed (111) crystal planes and few (100) crystal planes, while nano-polyhedral CZ-po exposed both (111) and (100) crystal planes. Clear structure-activity relationship could be demonstrated between the TWC (Three-way catalysts) performance of Pd/CeO2–ZrO2 and such different microstructures, as (100) and (111) crystal planes exposed by CZ-ro and CZ-po were beneficial for the surface oxygen vacancies formation, thus increasing the Pd-support interaction and effectively decreasing the light-off temperature of HC and NO elimination. On the other hand, the disordered CZ-di retained more lattice oxygen content, leading to better catalytic activity of CO elimination for the corresponding Pd/CZ-di catalyst.
Modification of Pd–CeO2 Catalyst by Different Treatments: Effect on the Structure and CO Oxidation Activity

Bin Wang,Duan Weng,Xiaodong Wu,Rui Ran

DOI: https://doi.org/10.1016/j.apsusc.2010.11.083

IF: 6.7

2010-01-01

Applied Surface Science

Abstract:To investigate the interaction between noble metal and CeO2, a Pd-doped CeO2 catalyst was prepared by sol–gel method, and the catalyst was then treated in static air and a H2/O2 alternating flow at 800°C, respectively. It is found by step-scanning XRD that Pd ions migrate out of the ceria lattice during the redox treatment, while the exudation of Pd is not so obvious after the oxidative treatment. For the CO oxidation activity, the redox treated catalyst is seriously weakened compared with the oxidative-treated one. This difference is ascribed to the encapsulation of Pd crystallites by the CeO2 support during the redox treatment, which is confirmed by XPS and CO-TPR. Based on the activity and FTIR results, it is proposed that, CO oxidation at low temperatures proceeds mainly via the reaction between the adsorbed CO on Pd sites and the lattice oxygen of surface CeO2 at the Pd–Ce interface.
Three-way catalytic performance of Pd/Ce0.67Zr0.33O2–Al2O3 catalysts: Role of the different Pd precursors

siyu lin,xue yang,linyan yang,renxian zhou

DOI: https://doi.org/10.1016/j.apsusc.2014.11.176

IF: 6.7

2015-01-01

Applied Surface Science

Abstract:•Pd dispersion and surface morphology are notable affected by Pd precursors.•PdOx species are mainly dispersed on Al2O3 surface in Pd/CZA(Cl) catalyst.•Pd/CZA(Cl) promotes HC and NO conversion, whereas Pd/CZA(NO) and Pd/CZA(NH) CO oxidation.•Surface chemistry under reaction conditions is revealed by in situ DRIFTS studies.
In Situ FT-infrared Investigation of CO Or/and NO Interaction with CuO/Ce0.67Zr0.33O2 Catalysts

Lianjun Liu,Bin Liu,Lihui Dong,Jie Zhu,Haiqin Wan,Keqin Sun,Bin Zhao,Haiyang Zhu,Lin Dong,Yi Chen

DOI: https://doi.org/10.1016/j.apcatb.2009.04.019

2009-01-01

Abstract:In situ FT-IR was employed to investigate CO or/and NO interaction with CuO supported on Ce0.67Zr0.33O2 (hereafter denoted as CZ) catalysts. The physicochemical properties of CuO–CZ were also studied by combination of XRD, TPR and NO+CO activity tests. The results indicated that the dispersed CuO species were the main active components for this reaction. The catalysts showed different activities and selectivities at low and high temperatures, which should be resulted from the reduction of dispersed copper oxide species. This reaction went through different mechanisms at low and high temperatures due to the change of active species. FT-IR results suggested: (1) CO was activated by oxygen originating from CZ support, which led to surface carbonates formation, and partial dispersed CuO was reduced to Cu+ species above 150°C; (2) NO interacted with the dispersed CuO and formed several types of nitrite/nitrate species, whereas crystalline CuO made little contribution to the formation of new NO adsorbates; (3) NO was preferentially adsorbed on CuO–CZ catalysts compared with CO in the reactants mixture. These adsorbed nitrite/nitrate species exhibited different thermal stability and reacted with CO at 250°C. As a result, a possible mechanism was tentatively proposed to approach NO reduction by CO over CuO–CZ catalyst.
A comparison of NiO–CuO–CeO2 composite catalysts prepared via different methods for CO oxidation

Yafei Guo,Guodong Wang,Xi Yao,Bingqian Liu

DOI: https://doi.org/10.1016/j.jssc.2020.121697

IF: 3.3

2020-12-01

Journal of Solid State Chemistry

Abstract:Several NiO–CuO–CeO2 catalysts were prepared via different methods and characterized by different techniques. Structure-activity relationships of the catalysts were demonstrated, and the effect of preparation methods on CO oxidation behaviors was illustrated. Catalytic results evidenced that the NiCuCe-CP and NiCuCe-SG catalysts prepared by co-precipitation and sol-gel methods exhibited better CO oxidation activities and kinetic performance, as evidenced by their lower T50 values (102 °C and 100 °C) and apparent activation energies (48.80 and 59.28 kJ/mol) as well as higher reaction rates (3.84 and 3.45 μmol/g/s). The XRD and HRTEM results suggested that the active species showed uniform dispersion with minimum crystallite size in the desired catalysts. The XRD, XPS, H2-TPR and Raman analysis suggested the formation of Ce1-xCuxO2-δ and Ce1-xNixO2-δ solid solutions, indicating that the co-precipitation and sol-gel methods reinforced the interactions amongst the ternary metal oxides. This would afford the catalysts more oxygen vacancies for boosted CO oxidation activity. The mechanism was then proposed with the dual synergetic effects in solid solutions for facilitated oxygen mobility and the amorphous active metal oxides for promoted CO chemisorption. The desired NiCuCe-CP and NiCuCe-SG catalysts show potential application for CO abatement in closed-loop air revitalization.

chemistry, physical, inorganic & nuclear
Redox Properties And Metal-Support Interaction Of Pd/Ce0.67zro.3302-Al203 Catalyst For Co, Hc And No Elimination

Siyu Lin,Linyan Yang,Xue Yang,Renxian Zhou

DOI: https://doi.org/10.1016/j.apsusc.2014.03.153

IF: 6.7

2014-01-01

Applied Surface Science

Abstract:Ce0.67Zr0.33 02, Ce0.67Zr0.3302-Al203 and -y-Al203 supported Pd catalysts (designated as Pd/CZ, Pd/CZA and Pd/Al2 03) have been characterized by XRD, CO chemisorption, in situ DRIFTS, XPS, HRTEM, H2-TPR, 02-TPSR and catalytic performance test. The results show that the small Pd0, particles dispersed in CZ would promote the conversion of HC, CO and NO2, while the Pd0, particles dispersed in Al203 promote the conversion of NO in the light-off process. Pd0, species mainly disperse on Al203-rich grains surface for fresh Pd/CZA catalyst, but easily migrate onto CZ-rich grains surface due to the strong interaction between Pd and ceria-based oxide under high temperature reaction conditions. And it promotes the thermal stability of Pd 0 species and resilience of Pd to Pd 0, therefore enhances the catalytic performance for HC, CO and NO elimination. Meanwhile, the interaction between CZ and Al203 can be enhanced after aging treatment, resulting in increasing the thermal stability of Pd/CZA catalyst. 2014 Elsevier B.V. All rights reserved.
Understanding the three-way catalytic reaction on Pd/CeO2 by tuning the chemical state of Pd

Yenan Liu,Jing Yang,Jie Yang,Li Wang,Yunsong Wang,Wangcheng Zhan,Yanglong Guo,Yunkun Zhao,Yun Guo

DOI: https://doi.org/10.1016/j.apsusc.2021.149766

IF: 6.7

2021-08-01

Applied Surface Science

Abstract:To investigate the correlation of activity and chemical state of Pd species in the three-way catalytic reaction, the supported Pd catalysts were prepared by using CeO2 calcined at different temperatures as supports. It turned out that the chemical state of Pd could severely affect the catalytic activity of Pd/CeO2, which depended on the CeO2 properties and the interaction between Pd and CeO2. With increasing CeO2 calcination temperature from 500 to 1200 °C, the state of Pd gradually transferred from Pd4+ as PdxCe1-xO2-σ to Pd2+ as PdO due to the decreased interaction between Pd and CeO2. Meanwhile, the TOFs of C3H8 oxidation linearly increased and the TOFs of CO oxidation showed a reversed trend, demonstrating the active states of Pd in C3H8 and CO oxidation were different. NO conversion was correlated to the activity of CO oxidation in low-temperature zone and C3H8 oxidation in high-temperature zone during the three-way catalytic reaction. Among them, Pd/CeO2(500) showed the highest CO oxidation activity and low-temperature NO conversion due to the enhanced adsorption ability of CO and NO. The existence of PdO on the surface of high-temperature calcined CeO2 facilitated C3H8 activation and reaction with surface nitrate/nitrite, which promoted NO conversion in high temperature.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Insights into the structure-activity relationships of highly efficient CuCe oxides for the low temperature CO oxidation and CO-SCR

Yajun He,Jun Liu,Guojie Zhang,Pengchao Zang,Guoqiang Li,Ying Wang

DOI: https://doi.org/10.1016/j.joei.2022.07.006

IF: 6.47

2022-10-01

Journal of the Energy Institute

Abstract:A series of Cu-doped Ce-based mixed metal oxide catalysts were prepared by the simplest impregnation method for CO oxidation and CO selective reduction of NOx (CO-SCR), respectively. Among them, 10Cu/CeO2 catalyst showed excellent catalytic activity and stability in both reactions. The catalysts were characterized by XRD, BET, SEM, TEM, XPS, H2-TPR, Raman, O2-TPD and in-situ DRIFTS. The results show that the preferential exposure of the (111) crystal plane of CeO2 is beneficial to the dispersion of Cu species. The introduced Cu enters the surface or lattice of CeO2, exposeing more catalyst active sites, which improves the catalyst reducibility and activity. In addition, the introduction of Cu into Ce-based catalyst also increases the types of active oxygen on the catalyst surface, improves the mobility of oxygen, and thus enhances the activity of the catalyst. The in-situ DRIFTS analysis shows that CO oxidation follows the M − K mechanism with Cu+ as the core species, while CO-SCR follows the E-R mechanism at low temperature (50–150 °C) and the L-H mechanism at high temperature (200–400 °C). These results show that CuCeO2 bifunctional catalyst can simultaneously meet the requirements of CO oxidation and CO-SCR reaction, which is of great significance for environmental governance.

energy & fuels
Promoting Effects of Pretreatment on Pd/CeO2 Catalysts for CO Oxidation

Jingrui Ye,Yang Xia,Dang-guo Cheng,Fengqiu Chen,Xiaoli Zhan

DOI: https://doi.org/10.1016/j.ijhydene.2019.05.099

IF: 7.2

2019-01-01

International Journal of Hydrogen Energy

Abstract:c CeO2 supported Pd catalysts were prepared in which the Pd species were presented in form of PdO and Ce1-xPdxO2-delta solid solution. The Pd/CeO2 catalysts were thermal treated for varying duration and its effect on Pd species was explored. The transformation of Pd species and redispersion were observed under oxidizing conditions at 500 degrees C. For catalyst treated with 10 h, more Pd ions penetrated into the CeO2 matrix to form Ce1-xPdxO2-delta solid solution, resulting in a 90% CO conversion at 84 degrees C after H-2 reduction. Another thermal treatment time extension led to an extraction of Pd from CeO2 lattice in tandem with higher dispersion and smaller PdO particles on the surface, which was demonstrated by the results of XRD, ICP, TEM images, CO pulse adsorption and CO-TPR as a redispersion phenomenon. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Investigation on the structure-activity relationship of Nb2O5 promoting CeO2-CrOx-Nb2O5 catalysts for 1,2-dichloroethane elimination

Jie Wan,Peng Yang,Xiaolin Guo,Renxian Zhou

DOI: https://doi.org/10.1016/j.mcat.2019.03.010

IF: 4.6

2019-01-01

Molecular Catalysis

Abstract:Highly dispersed (Ce,Cr)xO2 in Nb2O5 matrix can enhance the strong interaction between (Ce,Cr)xO2 and Nb2O5, facilitating acid-redox synergy to improve catalytic performance for DCE destruction.
Unraveling the Advantages of Pd/CeO 2 Single-Atom Catalysts in the NO + CO Reaction by Model Catalysts

Qian Xu,Xingwang Cheng,Ningqiang Zhang,Yi Tu,Lihui Wu,Haibin Pan,Jun Hu,Honghe Ding,Junfa Zhu,Yadong Li

DOI: https://doi.org/10.1007/s12274-023-5585-2

IF: 9.9

2023-01-01

Nano Research

Abstract:Selective catalytic reduction of NO by CO is challenging in environmental catalysis but attractive owing to the advantage of simultaneous elimination of NO and CO. Here, model catalysts consisting of Pd nanoparticles (NPs) and single-atom Pd supported on a CeO2 (111) film grown on Cu (111) (denoted as Pd NPs/CeO2 and Pd-1/CeO2, respectively) were successfully prepared and characterized by synchrotron radiation photoemission spectroscopy (SRPES) and infrared reflection absorption spectroscopy (IRAS). The NO + CO adsorption/reaction on the Pd-1/CeO2 and Pd NPs/CeO2 catalysts were carefully investigated using SRPES, temperature-programmed desorption (TPD), and IRAS. It is found that the reaction products on both model catalysts are in good agreement with those on real catalysts, demonstrating the good reliability of using these model catalysts to study the reaction mechanism of the NO + CO reaction. On the Pd NPs/CeO2 surface, N-2 is formed by the combination of atomic N coming from the dissociation of NO on Pd NPs at higher temperatures. N2O formation occurs probably via chemisorbed NO combined with atomic N on the surface. While on the single-atom Pd-1/CeO2 surface, no N2O is detected. The 100% N-2 selectivity may stem from the formation of O-N-N-O* intermediate on the surface. Through this study, direct experimental evidence for the reaction mechanisms of the NO + CO reaction is provided, which supports the previous density functional theory (DFT) calculations.

Investigation on the Structure- Activity Relationship of Bao Promoting Pd/ Ceo2-Zro2 Catalysts for Co, Hc and Nox Conversions

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

Effect of PdO Structure Properties on Catalytic Performance of Pd/Ce0.67Zr0.33O2 Catalyst for CO, HC and NO Elimination

Probing BaO Doping Effect on the Structure and Catalytic Performance of Pd/CexZr1–xO2 (x = 0.2–0.8) Catalysts for Automobile Emission Control

Investigation on properties of Pd/CeO2-ZrO2-Pr2O3 catalysts with different Ce/Zr molar ratios and its application for automotive emission control

Redox properties and metal–support interaction of Pd/Ce0.67Zr0.33O2–Al2O3 catalyst for CO, HC and NOx elimination

Design Structure for Cepr Mixed Oxide Catalysts in Soot Combustion

Investigation of the NO removal by CO on CuO–CoOx binary metal oxides supported on Ce0.67Zr0.33O2

Investigation of the Physicochemical Properties and Catalytic Activities of Ce0.67M0.33O2(M = Zr4+, Ti4+, Sn4+) Solid Solutions for NO Removal by CO

Morphology Controllable Synthesis of Pd/CeO2–ZrO2 Catalysts and Its Structure-Activity Relationship in Three-Way Catalytic Performance

Modification of Pd–CeO2 Catalyst by Different Treatments: Effect on the Structure and CO Oxidation Activity

Three-way catalytic performance of Pd/Ce0.67Zr0.33O2–Al2O3 catalysts: Role of the different Pd precursors

In Situ FT-infrared Investigation of CO Or/and NO Interaction with CuO/Ce0.67Zr0.33O2 Catalysts

A comparison of NiO–CuO–CeO2 composite catalysts prepared via different methods for CO oxidation

Redox Properties And Metal-Support Interaction Of Pd/Ce0.67zro.3302-Al203 Catalyst For Co, Hc And No Elimination

Understanding the three-way catalytic reaction on Pd/CeO2 by tuning the chemical state of Pd

Insights into the structure-activity relationships of highly efficient CuCe oxides for the low temperature CO oxidation and CO-SCR

Promoting Effects of Pretreatment on Pd/CeO2 Catalysts for CO Oxidation

Investigation on the structure-activity relationship of Nb2O5 promoting CeO2-CrOx-Nb2O5 catalysts for 1,2-dichloroethane elimination

Unraveling the Advantages of Pd/CeO 2 Single-Atom Catalysts in the NO + CO Reaction by Model Catalysts