Abstract:This study presented a meso-model for the fracture analysis of the reinforced concrete (RC) structure. A modeling method of RC meso-structure was proposed, and the rebars were allowed to separate from the concrete. The model was built using the cohesive zone model (CZM). The zero-thickness cohesive elements were adopted to characterize the mechanical behavior of potential fracture surfaces and rebar–concrete interfaces. The constitutive model for concrete was developed by considering the damage relation and friction effect, and the corresponding constitutive for the rebar–concrete interface (especially ribbed rebar) was developed by considering the influence of normal separation on the tangential bond–slip relation. To validate the proposed meso-model, a series of ribbed RC beams with an initial notch was designed and tested by four-point bending loading to obtain different fracture patterns. Through comparison, the developed RC meso-model was validated to simulate the RC structure's fracture behavior appropriately. The influence of the rebar–concrete interface constitutive model on the simulation results was investigated. The investigation results indicate that neglecting normal separation would result in an overestimation of the structure's stiffness and bearing capacity (the peak load was overestimated by more than 10%). Finally, an analysis was conducted on the energy consumption during the failure process of the RC beams. It was found that the proportion of energy consumption during tensile failure of the beam decreased from approximately 86% to 89% in the early stage to approximately 43% to 52% in the later stage, indicating a transition in the beam's failure mode from tensile failure to shear failure.

Mesoscale Computational Simulation of the Mechanical Response of Reinforced Concrete Members

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Cohesive Cracking Simulation of Concrete Using Effective Modulus

3D meso‐scale numerical model and dynamic mechanical behavior of reinforced concrete

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

A meso-scale analysis method for the simulation of nonlinear damage and failure behavior of reinforced concrete members

Numerical study on the impact performances of reinforced concrete beams: A mesoscopic simulation method

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Experimental and Numerical Analysis of the Ribbed Reinforced Concrete Fracture Behavior Based on the Mesoscale FE Model

Microscopic Numerical Simulation of Reinforced Concrete Damage Evolution under Uniaxial Tension and Compression

A mesoscale numerical simulation method for anti-impact performance of RC beams

Meso Numerical Simulation of Reinforced Concrete Members

Mesoscale simulation on f racture process of wedge splitting and three-point bending of concrete

Validation and Investigation on the Mechanical Behavior of Concrete Using a Novel 3D Mesoscale Method

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Numerical Simulation of Crack Development in Reinforced Concrete Structures under Eccentric Loading

3D Mesoscale Fracture Analysis of Concrete under Complex Loading

A Multiphase Mesostructure Mechanics Approach to the Study of the Fracture-Damage Behavior of Concrete

Mesoscopic Modeling Approach and Application for Steel Fiber Reinforced Concrete under Dynamic Loading: A Review